Pioneer VSX-823-K User Manual download pdf (Page 51)

Home Menu

Confirm your selected setup option.

The test tones will start after you press

ENTER

. After the

volume increases to the reference level, test tones will be

output.

Adjust the level of each channel using

/

If you selected Manual, use

/

to switch speakers. The

Auto setup will output test tones in the order shown on-

screen:

Adjust the level of each speaker as the test tone is

emitted.

Note

•

If you are using a Sound Pressure Level (SPL) meter, take

the readings from your main listening position and adjust

the level of each speaker to 75 dB SPL (C-weighting/slow

reading).

•

The subwoofer test tone is output at low volumes. You may

need to adjust the level after testing with an actual

soundtrack.

When you’re finished, press

RETURN

You return to the Manual SP Setup menu.

Tip

•

You can change the channel levels at any time by press

, then press

CH SELECT

and

LEV +/–

on the

remote control. You can also press

CH SELECT

and use

/



to select the channel, and then use

/

to adjust the

channel levels.

Speaker Distance

For good sound depth and separation from your system, you

need to specify the distance of your speakers from the

listening position. The receiver can then add the proper delay

needed for effective surround sound.

Select ‘Manual SP Setup’ from the Home Menu.

Select ‘Speaker Distance’ from the Manual SP Setup

menu.

Adjust the distance of each speaker using

/

You can adjust the distance of each speaker in 0.1 feet

increments.

When you’re finished, press

RETURN

You return to the Manual SP Setup menu.

The Input Assign menu

Assigns input function for analog audio input terminal and

component video input terminal (component video input

terminal for VSX-1023 only).

•

For the assignment of the digital signal inputs, see

Selecting the audio input signal

on page 25.

Analog Input

ANALOG IN1 audio input terminal is assigned to CD under

factory settings, but this can be changed to TV input.

Select ‘Input Assign’ from the Home Menu.

Select ‘Analog Input’ from the Input Assign menu.

Select the desired input option for the ANALOG IN1

audio input terminal.

When you’re finished, press

RETURN

You return to the Input Assign menu.

Note

•

When playing analog input audio, switch to the CD or TV

input menu, press and press

SIGNAL SEL

several times to choose A (Analog). (see Selecting the audio

input signal on page 25)

Component Input (VSX-1023 only)

COMPONENT VIDEO IN1 input terminal is assigned to DVD

under factory settings, but this can be changed to SAT/CBL

input.

Select ‘Input Assign’ from the Home Menu.

. Channel Level

Please Wait . . .20

Caution

Loud test tones

will be output.

Return

Test Tone [ Manual ]

. Channel Level

Front L

Center

Front R

Surround R

Surr. Back R

Surr. Back L

Surround L

Subwoofer

Return

[ 0dB ]

[

–

– ]

[

–

– ]

[ 0dB ]

0dB

RECEIVER

. Manual SP Setup

Return

. Speaker Setting

. X.Over

. Channel Level

. Speaker Distance

Front L

Center

Front R

Surround R

Surr. Back R

Surr. Back L

Surround L

Subwoofer

Return

[ 10.0 ft ]

[ –

–

– ]

[ –

–

– ]

[ 10.0 ft ]

10.0 ft

. Input Assign

Return

. Analog Input

. Component Input

. Analog Input

Return

Analog CD

VSX-1023

RECEIVER

VSX-1023_823_UCSMXCN_En.book 51 ページ２０１２年１２月１８日　火曜日　午前１１時７分

1 ... 50 51 52 ... 68

Comments to this Manuals

No comments

Pioneer VSX-823-K User Manual Page 51

Comments to this Manuals

Related products and manuals for AV receivers Pioneer VSX-823-K