Pioneer VSX-823-K User Manual download pdf (Page 64)

Additional information

 Cannot access Windows Media Player 11 or Windows

Media Player 12.

 In case of Windows Media Player 11: You are currently logged

onto the domain through your PC with Windows XP or

Windows Vista installed. Instead of logging onto the domain,

log onto the local machine (page 40).

 In case of Windows Media Player 12: You are currently logged

onto the domain through your PC with Windows 7 installed.

Instead of logging onto the domain, log onto the local machine

(page 40).

 Cannot listen to Internet radio stations.

 The firewall settings for components on the network are

currently in operation. Check the firewall settings for

components on the network.

 You are currently disconnected from the Internet. Check the

connection settings for components on the network, and

consult with your network service provider if necessary

(page 42).

 The broadcasts from an Internet radio station are stopped or

interrupted. There are cases where you cannot listen to some

Internet radio stations even when they are listed in the list of

Internet radio stations on this receiver (page 41).

 The NETWORK function cannot be operated with the

buttons on the remote control.

 The remote control is not currently set to the NETWORK mode.

Press

NETWORK

to set the remote control to the NETWORK

mode (page 46).

HDMI

 No picture or sound.

 If the problem still persists when connecting your HDMI

component directly to your monitor, please consult the

component or monitor manual or contact the manufacturer for

support.

 No picture.

 Video signals that are input from the analog video terminal will

not output from the HDMI terminal. Signals that are input from

the HDMI terminal will not output from the analog video

terminal. Be consistent with the type of cable between input

and output.

 Depending in the output settings of the source component, it

may be outputting a video format that can’t be displayed.

Change the output settings of the source, or connect using the

composite video jacks.

 This receiver is HDCP-compatible. Check that the components

you are connecting are also HDCP-compatible. If they are not,

please connect them using the composite video jacks.

 Depending on the connected source component, it’s possible

that it will not work with this receiver (even if it is HDCP-

compatible). In this case, connect using the composite video

jacks between source and receiver.

 If video images do not appear on your TV, try adjusting the

resolution, Deep Color or other setting for your component.

 To output signals in Deep Color, use an HDMI cable (High

Speed HDMI

®/

™ Cable) to connect this receiver to a

component or TV with the Deep Color feature.

 No sound, or sound suddenly ceases.

 Check that the HDMI setting is set to AMP (page 37).

 If the component is a DVI device, use a separate connection for

the audio.

 HDMI format digital audio transmissions require a longer time

to be recognized. Due to this, interruption in the audio may

occur when switching between audio formats or beginning

playback.

 Turning on/off the device connected to this unit’s HDMI OUT

terminal during playback, or disconnecting/connecting the

HDMI cable during playback, may cause noise or interrupted

audio.

 Synchronized operation not possible using Control with

HDMI function.

 Check the HDMI connections.

 The cable may be damaged.

 Select ON for the Control with HDMI setting (see HDMI Setup

on page 55).

 Turn the TV’s power on before turning on this receiver’s power.

 Set the TV side Control with HDMI setting to on (see TV’s

operating instructions).

Important information regarding the HDMI

connection

There are cases where you may not be able to route HDMI

signals through this receiver (this depends on the HDMI

equipped component you are connecting-check with the

manufacturer for HDMI compatibility information).

If you aren’t receiving HDMI signals properly through this

receiver (from your component), please try the following

configuration when connecting up.

Configuration

Connect your HDMI-equipped component directly to the

display using an HDMI cable. Then use the most convenient

connection (digital is recommended) for sending audio to the

receiver. See the operating instructions for more on audio

connections. Set the display volume to minimum when using

this configuration.

Note

•

Depending on the component, audio output may be limited

to the number of channels available from the connected

display unit (for example audio output is reduced to 2

channels for a monitor with stereo audio limitations).

•

If you want to switch the input source, you’ll have to switch

functions on both the receiver and your display unit.

•

Since the sound is muted on the display when using the

HDMI connection, you must adjust the volume on the

display every time you switch input sources.

Windows 7

Windows and the Windows logo are trademarks of the Microsoft

group of companies.

MHL

MHL, the MHL Logo, and Mobile High-Definition Link are

trademarks or registered trademarks of MHL, LLC in the United

States and other countries.

This receiver incorporates MHL 2.

VSX-1023_823_UCSMXCN_En.book 64 ページ２０１２年１２月１８日　火曜日　午前１１時７分

1 ... 63 64 65 66 67 68

Comments to this Manuals

No comments

Pioneer VSX-823-K User Manual Page 64

Comments to this Manuals

Related products and manuals for AV receivers Pioneer VSX-823-K