Pioneer VSX-D909S User Manual download pdf (Page 38)

1 Select BASS PEAK LEVEL (if continuing

from CROSSOVER NETWORK it will already

be selected).

See “Setting Up for Surround Sound“

on page 29 if you are

unsure how to do this.

Press the ENTER button.

Bass Peak Level Manager

[Setting Start ]

[Setting Cancel]

[EXIT]

2 Output the test tone for the LFE channel

and specify the peak level.

1 If your subwoofer has a volume control, set it to the middle

position before proceeding.

2 Select SETTING START.

3 Press the ENTER button.

Bass Peak Manager

[– 50]

[Setting OK ]

Bass Peak Level

[EXIT]

MASTER VOLUME rotates to MIN (---dB). Then the test tone

is output to the subwoofer or front or surround speakers.

4 Use the 2 or 3 button arrows to gradually increase the level

of the LFE channel until the test tone begins to distort. Then

go back and leave the level setting at a point just before

that. Press the ENTER button and the receiver will

remember this bass output level.

To exit before outputting the TEST TONE select EXIT and press

the ENTER button.

To exit while outputting the TEST TONE press the ENTER

button.

3 Select EXIT and press the ENTER button to

return to the SYSTEM SETUP MENU.

This completes the speaker setup.

Bass Peak Level

The LFE (Low Frequency Effect) channel in Dolby Digital or DTS program sources can produce heavy ultra-low

bass tones that may exceed the capabilities of your speaker system. The following steps show you how to set a

maximum output level for the LFE channel. If continuing from Crossover Network go to step 1. If starting fresh,

complete steps 1-3 in "Setting Up for Surround Sound" (p.29) first.

If you select SETTING CANCEL

no settings are input to the

receiver but the screen remains

on the TV. To escape the screen

you must Select EXIT and press

the ENTER button.

memo

AV PRE-PROGRAMMED AND LEARNING

REMOTE CONTROL UNIT

S0URCE

DVD/LD TV/SAT VCR1 VCR2

TV VOL

TV FUNC

ENTER

STEREO/

DIRECT

DSP

LIGHT

MUTE

VOLUME

MD/

TAPE1

TUNER TVCONT

RECEIVER

USE SETUP

MULTI

OPERATION

CLASS MPX

DIRECT ACCESS

CHANNEL

STATION

TV CONTROL

FUNCTION

REMOTE SETUP

SYSTEM SETUP

INPUT

ATT

ADVANCED

MIDNIGHT

MULTI CH

INPUT

STANDARD

DIGITAL

EFFECT/

CH SEL

SIGNAL

SELECT

BAND

SYSTEM

OFF

123

456

789

Î

¶

873

1¡4¢

MULTI CONTROL

––

–

1-3

ADVANCED

DISC

EXIT

+10

GUIDE

ENTER

DTV ON/OFF DTV MENU

TUNING

DTS

STANDBY/ON

DSP

MODE

MULTI-ROOM

&SOURCE

INPUT

SELECTOR

MASTER

VOLUME

SIGNAL SELECT

ADVANCED STANDARD

CONTROL

STANDBY

AUDIO/VIDEO MULTI-CHANNEL RECEIVER

STEREO/

DIRECT

PHONES

S-VIDEO VIDEO

MULTI CH

INPUT

DIMMER

TAPE 2

MONITOR

TONE

CHANNEL

SELECT

LOUDNESS

DIGITAL

CLASS BAND

TUNER CONTROL

MEMORYMPX

VIDEO

SELCT

SPEAKERS

TUNING +

STATION +

TREBLE +

BASS +

L AUDIO R

VIDEO INPUT

Digital Signal Processor

VSX-D909S

/DTS

DOWN UP

MASTER VOLUME

Initial Set Up

1 ... 37 38 39 ... 92

Comments to this Manuals

No comments

Pioneer VSX-D909S User Manual Page 38

Comments to this Manuals

Related products and manuals for AV receivers Pioneer VSX-D909S