Pioneer DEH-P6900IB User Manual download pdf (Page 28)

2 Push MULTI-CONTROL up or down to

select a desired level.

0 to +6 is displayed as the level is increased or

decreased.

Using the high pass filter

When you do not want low sounds from the

subwoofer output frequency range to play

from the front or rear speakers, turn on the

HPF (high pass filter). Only frequencies higher

than those in the selected range are outputted

from the front or rear speakers.

1 Use MULTI-CONTROL to select HPF.

2 Press MULTI-CONTROL to turn high

pass filter on.

80Hz appears in the display. High pass filter is

now on.

# If the high pass filter has been previously ad-

justed, the frequency of that previously selected

will be displayed instead of 80Hz.

# To turn high pass filter off, press

MULTI-CONTROL again.

3 Push MULTI-CONTROL left or right to

select cut-off frequency.

Each time MULTI-CONTROL is pushed left or

right, cut-off frequencies are selected in the

following order:

50Hz—63Hz—80Hz—100Hz—125Hz

Only frequencies higher than those in the se-

lected range are outputted from the front or

rear speakers.

Adjusting source levels

SLA (source level adjustment) lets you adjust

the volume level of each source to prevent ra-

dical changes in volume when switching be-

tween sources.

! Settings are based on the FM tuner volume

level, which remains unchanged.

1 Compare the FM tuner volume level

with the level of the source you wish to ad-

just.

2 Use MULTI-CONTROL to select SLA.

3 Push MULTI-CONTROL up or down to

adjust the source volume.

Each time MULTI-CONTROL is pushed up or

down, source volume increases or decreases.

SLA +4 to SLA –4 is displayed as the source

volume is increased or decreased.

Notes

! The MW/LW tuner volume level can also be

adjusted with source level adjustments.

! The built-in CD player and the multi-CD player

are set to the same source level adjustment

volume automatically.

! External unit 1 and external unit 2 are set to

the same source level adjustment volume

automatically.

Using automatic sound levelizer

During driving, noise in the car changes ac-

cording to the driving speed and road condi-

tions. The automatic sound levelizer (ASL)

monitors such varying noise and automati-

cally increases the volume level, if this noise

becomes greater. The sensitivity (variation of

volume level to noise level) of ASL can be set

to one of five levels.

1 Use MULTI-CONTROL to select ASL.

2 Press MULTI-CONTROL to turn ASL on.

Mid appears in the display.

# To turn ASL off, press MULTI-CONTROL

again.

3 Push MULTI-CONTROL left or right to

select the desired ASL level.

Each time MULTI-CONTROL is pushed left or

right, ASL level is selected in the following

order:

Low (low)—Mid-L (mid-low)—Mid (mid)—

Mid-H (mid-high)—High (high)

Operating this unit

En

28

Section

02

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 125 126

Comments to this Manuals

No comments