Pioneer XDV-P9 User Manual download pdf (Page 51)

Changing Initial Settings

Setting for Digital Output (DIGITAL OUTPUT)

Set digital output correctly to match the components you are using with this unit. There is no

need to change settings if this unit is not connected for digital output.

Precaution:

• Incorrect setting may result in noise and damage to speakers so be sure to read the manuals

of the connected components.

Move the joystick up/down to select

the “DIGITAL OUTPUT”.

“DIGITAL OUTPUT” is indicated in blue. (For

details, see page 40.)

Press the ENTER button.

Digital output settings are indicated on the right of

the screen.

Move the joystick up/down to select the

desired digital output setting.

The currently set digital output setting is indicated in

yellow. The digital output setting selected with the

joystick is indicated in blue.

Digital output Setting detail

DOLBY DIGITAL/LPCM Select when using a Dolby Digital compatible amp and decoder. The

Dolby Digital signal is output as it is. (Initial setting)

• When using this product with a Pioneer Multi-Channel AV

Master Unit with digital input (e.g. AVM-P9000R, AVM-

P9000), select the “DOLBY DIGITAL/LPCM” setting.

LPCM Select when using an amp and decoder that are not Dolby Digital

compatible. The Dolby Digital signal is converted to and output as a

linear PCM signal.

Press the ENTER button.

The selected digital output setting is set.

Note:

• Linear PCM output of DTS audio is not possible. If you select the LPCM setting, DTS audio

is not output.

• Pressing the RETURN button takes you back to the previous display.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 78 79

No comments

Pioneer XDV-P9 User Manual Page 51