Pioneer XDV-P9 User Manual download pdf (Page 58)

55

Others

Troubleshooting

7 Common problems

Symptom Cause Remedy

Power doesn’t switch ON.

The unit doesn’t operate.

Operation with the remote

control isn’t possible.

The unit does not operate

correctly even when the

appropriate remote control

buttons are pressed.

Playback is not possible.

There’s no sound.

If the problem still

remains.

Request repairs.

\

If the problem

remains even after

checking.

Reset the unit. (See

page 6.)

\

If you think there is

something wrong

with the unit.

Before requesting

repairs, check the

following chart.

Leads and connectors are incor-

rectly connected.

A fuse has blown.

Noise and other factors are caus-

ing the built-in microprocessor

to operate incorrectly.

The remote control operation

mode is incorrect.

Battery power is low.

Some operations are prohibited

with certain discs.

The disc is dirty.

The loaded disc is a type this

unit cannot play.

Non compatible video system

disc is loaded.

Connections are incorrect.

With some discs, 96 kHz output

is prohibited.

The unit is performing Still,

Slow Motion or Frame-By-

Frame playback.

Confirm once more that all con-

nections are correct.

Fix the problem causing the

blown fuse, and replace the old

fuse with a new one of the same

capacity.

Press the RESET button. (See

page 6.)

Switch to the correct remote

control mode. (See page 7.)

Load new batteries. (See page 8.)

Check using another disc.

Clean the disc. (See page 13.)

Check what type the disc is.

Change to a disc compatible to

your video system.

Check connections.

Switch the output setting to

48 kHz. (See page 49.)

There is no sound during Still,

Slow Motion or Frame-By-

Frame playback.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 78 79

Comments to this Manuals

No comments