Pioneer AVH-P3300BT User Manual download pdf (Page 59)

Boosting the bass

You can boost the bass level.

1 Display the audio function menu.

Refer to Introduction of menu operations on

page 56.

2 Touch c or d to select a desired level.

Range: 0 to +6

Using the high pass filter

When you do not want low sounds from the

subwoofer output frequency range to play

from the front or rear speakers, turn on the

HPF (high pass filter). Only frequencies higher

than those in the selected range are output

from the front or rear speakers.

1 Display the audio function menu.

Refer to Introduction of menu operations on

page 56.

2 Touch c or d next to Frequency to se-

lect cut-off frequency.

Off (off)—50Hz—63Hz—80Hz— 100Hz—

125Hz

Only frequencies higher than those in the se-

lected range are output from the front or rear

speakers.

Adjusting source levels

With SL A (source level adjustment), the vo-

lume levels of each source can be adjusted to

prevent significant differences between

sources.

! Settings are based on the FM volume level,

which remains unchanged.

1 Display the audio function menu.

Refer to Introduction of menu operations on

page 56.

2 Compare the FM volume level with the

level of the source you wish to adjust.

3 Touch Source Level Adjuster on the

audio function menu.

4 Touch a or b to adjust the source vo-

lume.

Range: +4 to –4

Notes

! The AM volume level can also be adjusted

with this function.

! Video CD, CD, compressed audio and DivX

are automatically set to the same source level

adjustment volume.

! iPod and USB storage device are automati-

cally set to the same source level adjustment

volume.

! External unit 1 and external unit 2 are automa-

tically set to the same source level adjustment

volume.

<QRB3126-A/N>59

En

59

Section

15

Menu operations

Menu operations

1 ... 58 59 60 ... 112

Comments to this Manuals

No comments