Pioneer AVH-P3300BT User Manual download pdf (Page 86)

Troubleshooting

Common

Symptom Cause Action (Refer-

ence page)

The power will

not turn on.

The unit will

not operate.

Leads and con-

nectors are incor-

rectly connected.

Confirm once more

that all connec-

tions are correct.

The fuse is

blown.

Rectify the cause

and then replace

the fuse. Be sure to

install a fuse with

the same rating.

Noise and/or

other factors are

causing the built-

in microproces-

sor to operate in-

correctly.

Press RESET.(Page

11)

Operation with

the remote

control is not

possible.

The unit does

not operate

correctly even

when the ap-

propriate re-

mote control

buttons are

pressed.

Battery power is

low.

Load a new battery.

Some operations

are prohibited

with certain

discs.

Tr y operating with

another disc.

Playback is not

possible.

The disc is dirty. Clean the disc.

The type of disc

loaded cannot be

played on this

unit.

Check the disc

type.

The disc loaded

is not compatible

with this video

system.

Change the disc to

one that is compa-

tible with your

video system.

There is no

sound.

The volume

level will not

rise.

Cables are not

connected cor-

rectly.

Connect the cables

correctly.

The unit is per-

forming still,

slow motion or

frame-by-frame

playback.

There is no sound

during still, slow

motion or frame-

by-frame playback.

Symptom Cause Action (Refer-

ence page)

There is no

image dis-

played.

The parking

brake cable is

not connected.

Connect the park-

ing brake cable,

and apply the park-

ing brake.

The parking

brake is not ap-

plied.

Connect the park-

ing brake cable,

and apply the park-

ing brake.

The

icon is

displayed, and

operation is not

possible.

The operation is

prohibited for the

disc.

This operation is

not possible.

The operation is

not compatible

with the config-

uration of the

disc.

This operation is

not possible.

The image dis-

played stops

(pauses) and

the unit cannot

be operated.

The data could

no longer be

read during play-

back.

Stop playback

once, and start

playback again.

There is no

sound.

The volume

level is low.

The volume level

is low.

Adjust the volume

level.

The attenuator is

on.

Turn the attenuator

off.

The sound and

video skip.

The unit is not

firmly secured.

Firmly secure the

unit.

File size and

transmission rate

are above recom-

mended rates.

Create a DivX file

that is within the

recommended size

and transmission

rate.

The aspect

ratio is incor-

rect and the

image is

stretched.

The aspect ratio

setting is incor-

rect for the dis-

play.

Select the appro-

priate setting for

your display. (Page

61)

The motor

sounds when

the ignition

switch is

turned ON (or

is turned to

ACC).

The unit is con-

firming whether

or not a disc is

loaded.

This is a normal

operation.

<QRB3126-A/N>86

En

86

Appendix

Additional Information

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 111 112

Comments to this Manuals

No comments