Pioneer DJM-850-K User Manual download pdf (Page 14)

Basic Operation

Outputting sound

1 Press [POWER] button.

Turns on the power of this unit.

2 Switch the [CD/LINE, PHONO, LINE, USB */*] selector

switch.

Selects the input sources for the different channels from among the

devices connected to this unit.

— [PHONO]: Selects the analog player connected to the [PHONO]

terminals.

— [CD/LINE], [LINE]: Selects the DJ player or cassette deck con-

nected to the [CD/LINE] or [LINE] terminals.

— [USB */*]: Selects the sound of the computer connected to the

[USB] port.

3 Turn the [TRIM] control.

Adjusts the level of audio signals input in each channel.

The corresponding channel level indicator lights when audio signals are

being properly input to that channel.

4 Move the channel fader away from you.

Adjusts the level of audio signals output in each channel.

5 Switch the [CROSS FADER ASSIGN (A, THRU, B)]

selector switch.

Switches the output destination of each channel.

— [A]: Assigns to [A] (left) of the crossfader.

— [B]: Assigns to [B] (right) of the crossfader.

— [THRU]: Selects this when you do not want to use the crossfader.

(The signals do not pass through the crossfader.)

6 Set the crossfader.

This operation is not necessary when the [CROSS FADER ASSIGN (A,

THRU, B)] selector switch is set to [THRU].

7 Turn the [MASTER LEVEL] control.

Audio signals are output from the [MASTER1] and [MASTER2]

terminals.

The master level indicator lights.

Adjusting the sound quality

Turn the [EQ/ISO (HI, MID, LOW)] controls for the

respective channels.

Refer to Specifications on page 27 for the range of sound that can be

adjusted by each control.

 Switching the function of the [EQ/ISO (HI, MID,

LOW)] controls

Switch the [EQ CURVE (ISOLATOR, EQ)] selector switch.

— [ISOLATOR]: Functions as an isolator.

— [EQ]: The equalizer function is set.

Monitoring sound with headphones

1 Connect headphones to the [PHONES] terminal.

2 Press the [CUE] button(s) for the channel(s) you want

to monitor.

3 Switch the [MONO SPLIT, STEREO] selector switch.

— [MONO SPLIT]: The sound of the channels for which the [CUE]

button is pressed is output from the headphones output’s left

channel, the [MASTER] channel sound is output from the right

channel.

— [STEREO]: The sound of the channels for which the [CUE] button

is pressed is output from the headphones in stereo.

4 Turn the [MIXING] control.

This adjusts the monitor volume balance of the sound of channels for

which the [CUE] button is pressed and the sound of the [MASTER]

channel.

5 Turn the [LEVEL] control for [HEADPHONES].

The sound of the channels for which the [CUE] button is pressed is

output from the headphones.

! When the [CUE] button is pressed again, monitoring is canceled.

Switching the fader curve

 Select the channel fader curve characteristics.

Switch the [CH FADER (

, , )] selector switch.

— [ ]: The curve rises suddenly at the back side.

— [ ]: A curve between the ones above and below is set.

— [

]: The curve rises gradually (the sound gradually increases as

the channel fader is moved away from the front side).

 Select the crossfader curve characteristics.

Switch the [CROSS FADER (

, , )] selector switch.

— [ ]: Makes a sharply increasing curve (if the crossfader is

moved away from the [A] side, audio signals are immediately

output from the [B] side).

— [

]: Makes a curve shaped between the two curves above and

below.

— [

]: Makes a gradually increasing curve (if the crossfader is

moved away from the [A] side, the sound on the [B] side gradu-

ally increases, while the sound on the [A] gradually decreases).

Starting playback on a DJ player using

the fader (fader start)

If you connect a Pioneer DJ player using a control cable (supplied with

a DJ player), you can start playback of control other operations of the DJ

player with the fader of this unit.

Connect this unit and Pioneer DJ player beforehand. For instructions on

connections, see Connecting input terminals on page 7.

The fader start function can be switched on and off for all DJ players all

at once. For the switching procedure, see Changing the settings on page

23.

 Start playback using the channel fader

1 Set the [CROSS FADER ASSIGN (A, THRU, B)] selector

switch to [THRU].

2 Press one of the [FADER START (1, 2, 3, 4)] buttons.

Select the channel to be started with the fader start function.

3 Set the channel fader to the nearest position towards

you.

4 Set the cue on the DJ player.

The DJ player pauses playback at the cue point.

5 Move the channel fader away from you.

Playback starts on the DJ player.

! If you set the channel fader back to the original position, the player

instantaneously returns to the cue point already set and pauses

playback (back cue).

1 ... 13 14 15 ... 84

Comments to this Manuals

No comments

Pioneer DJM-850-K User Manual Page 14

Comments to this Manuals

Related products and manuals for DJ controllers Pioneer DJM-850-K

Relacionado con productos y manuales para Auricular inalámbrico teléfono Avaya INDeX 2030