Pioneer DV58AV_KU_EN User Manual download pdf (Page 14)

Controlling this player via another Pioneer

component

The CONTROL IN jack allows you to control this player via the

remote control sensor of another Pioneer component — typically an

AV receiver — that has a CONTROL OUT jack. Remote control

signals are passed through to the player from the remote sensor of

the other component, allowing you greater freedom in the

placement of your player.

• Use a miniplug cord (not supplied) to connect the CONTROL

IN jack of this player with the CONTROL OUT jack of your other

Pioneer component.

• You will also need to connect a coaxial digital cable, analog

audio cable, or video cable.

• When connected via System Control, point the remote control

toward the connected component (such as an AV receiver). The

remote will not work correctly when pointed at this unit.

• You cannot connect use System Control with components that

do not have a System Control jack or with components

manufactured by companies other than Pioneer.

Connecting using HDMI

If you have a HDMI equipped monitor or display, you can connect it

to this player using a commercially available HDMI cable.

The HDMI connector outputs uncompressed digital video, as well as

almost every kind of digital audio that the player is compatible with,

including DVD-Video, DVD-Audio (see below for limitations), SACD,

Video CD, CD, WMA, MP3, MPEG-4 AAC, DivX video and WMV.

• Use an HDMI cable (not supplied) to connect the HDMI OUT

interconnect on this player to an HDMI interconnect on a

HDMI-compatible display.

The arrow on the cable connector body should be face up for correct

alignment with the connector on the player.

Note

• This unit has been designed to be compliant with HDMI (High-

Definition Multimedia Interface). Depending on the component

you have connected, using a DVI connection may result in

unreliable signal transfers.

• When you change the component connected to the HDMI

output, you will also need to change the HDMI settings to match

the new component (see HDMI Out on page 32, Resolution

(Max) and HDMI Color on page 33 to do this). However, the

settings for each component are then stored in memory (for up

to 2 components).

• The HDMI connection is compatible with 2 channel linear PCM

signals (44.1 kHz to 192 kHz, 16 bit/20 bit/24 bit), and Dolby

Digital, DTS, MPEG audio bitstream, multi channel DSD, and

multi channel linear PCM signals, (5.1 channel signals up to

96 kHz, 16 bit/20 bit/24 bit).

• Depending on the HDMI cable being used, 1080p output may

not appear correctly.

To CONTROL OUT

AV Receiver

To HDMI interconnect

HDMI-compatible display

DV58AV_KU_EN.book 14 ページ２００７年８月３０日　木曜日　午後１時６分

1 ... 13 14 15 ... 48

Comments to this Manuals

No comments

Pioneer DV58AV_KU_EN User Manual Page 14

Comments to this Manuals

Related products and manuals for DVD players Pioneer DV58AV_KU_EN