Pioneer DVD-V5000 RS-232C User Manual download pdf (Page 54)

DVD-V5000 DVD Player

RS-232 Command Protocol

The user’s area has lines numbered from 0 to 9 with a total of 10 lines

available. If line 0 is designated to show system information, all following

lines are hidden.

The player allows/displays up to 320 characters (32 characters per line with

10 lines available). Follow the instructions below to create a User’s Display:

1. Select User's Display in Register A

2. Set the display data using a print character command

3. Turn display switch ON

Execution :

String Status Return DVD player

1DS<CR> R<CR> Display Off to Display On

1RA<CR> R<CR>

Only Frame number is displayed

6.14 Register D Set

Function : current setting of Register D is rewritten

Format : Integer RD

Explanation : Register D contains the termination setting of the serial

communication (RS232). There are two choices, “CR” or “CR + LF”. The

default for Register D is 0.

Argument Function

0 (default) CR

64 CR + LF

6.15 Print Character

Function : Characters are written into the User's Display Area

(Not to be issued simultaneously with other commands)

Format : Integer PR <CR>

Character string <CR>

Explanation : The command writes a character string for one line into the User

Display Area (turn ON the User Display Specification in Register A).

Follow the instructions listed below to create printed characters.

1. Specify the line number using an integer in the range 0 ~ 9

- 47

1 ... 53 54 55 ... 96

No comments

Pioneer DVD-V5000 RS-232C User Manual Page 54