Pioneer DVR-320-S User Manual download pdf (Page 44)

100

Recording

Basic recording from the TV

Follow the instructions below to record a TV program.

Recording starts immediately and continues until the

disc is full or you stop the recording.

1 Load a recordable disc.

• If you load a new blank DVD-RW disc, the recorder

takes a short while to initialize the disc.

2 Use the CHANNEL +/– buttons to select the TV

channel to record.

The front panel display shows the channel number:

• While the recorder is stopped, you can also use the

number buttons on the remote to select the channel.

(For channel 6, press

then

ENTER

; for channel 24,

press

2, 4

then

ENTER

)

• If the recorder is stopped, you can also use the

+/–

buttons on the front panel to select the channel

number.

3 Use the REC MODE button to set the picture

quality/recording time.

• See

Setting the picture quality/recording time

above

for detailed instructions.

4 Use the AUDIO button to select the audio

channel to record.

See

Changing audio channels

on page 27 for more on

this.

• When recording in VR mode, both mono and SAP

audio channels are recorded, allowing you to switch

the audio channel on playback. The only exception to

this is when the picture quality is set to

FINE

MN32

in which case you do need to select the audio

channel before recording.

5 Press



REC to start recording.

If you want to set a recording end time, press the



REC

button repeatedly. The recording time increases in 30

minute increments, up to a maximum of six hours. The

time the recording will end is shown on-screen and in the

front panel display. When the recording ends, the

recorder automatically switches into standby if no other

operation is being performed.

• To cancel the set recording time, press



REC

• If you want to pause recording at any time, press



PAUSE

. Press again to restart the recording. (If

recording in VR mode, a new chapter is started after

recording restarts)

6 To stop the recording, press



STOP REC.

• If you set the recording time in the previous step, you

can still stop the recording anytime by pressing



STOP REC

• Recording will stop automatically when there is no

more space on the DVD.

Setting a timer recording

Using the timer recording features you can program up

to 32 timer recordings up to a month in advance. Timer

recording programs can be set to record just once, every

day, or every week.

You can set the recording quality for your timer recording

in the same way as for a regular recording, but with the

added option of an

AUTO

mode, which maximizes the

recording quality for the space available on the disc.

You can also set the recorder so that it will adjust the

recording quality to try and fit the recording on to the disc

if it would not otherwise fit at the recording quality you set

(see

Optimized Rec

on page 83 for more on this).

VR mode Video mode

AUDIO

ENTER

CHANNEL

REC

PAUSE

STOP REC

REC MODE



23 30 7

Channel preset

VR mode Video mode

RL_s Singapore.book 44 ページ２００４年４月２３日　金曜日　午後８時１１分

1 ... 43 44 45 ... 100

Comments to this Manuals

No comments

Pioneer DVR-320-S User Manual Page 44

Comments to this Manuals

Related products and manuals for DVD players Pioneer DVR-320-S