Pioneer N-50 Operations Instructions download pdf (Page 33)

Additional information

corresponding information again. Check whether the

connection status is set to “Do not authorize”.

 There are no playable audio files on the component connected

to the network. Check the audio files stored on the component

connected to the network.



Wireless Accessory Configuration fails.

 If the iOS device is not connected via Wi-Fi, connect the iOS

device via Wi-Fi.

 If the iOS device and router are connected via 5 GHz, change

the connection between the iOS device and router to 2.4 GHz,

or use a different setting method.



Playback does not start.

 The component is currently disconnected from this unit or the

power supply. Check whether the component is properly

connected to this unit or the power supply.



The computer or Internet Radio is not properly operated.

 The corresponding IP address is not properly set. Switch on the

built-in DHCP server function of your router, or set up the

network manually according to your network environment

(page 25).



The IP address is being automatically configured.

 The automatic configuration process takes time. Please wait.



The audio files stored on components on the network, such

as a computer, cannot be played back.

 Windows Media Player 11 or Windows Media Player 12 is not

currently installed on your computer. Install Windows Media

Player 11 or Windows Media Player 12 on your computer

(page 28).

 Audio files were not recorded in a format playable on this unit.

Check whether the audio files were recorded in a format

supported by this unit (page 38).

 Are you trying to playback a MPEG-4 AAC or FLAC file using

Windows Media Player 11? It is not possible to playback a

MPEG-4 AAC or FLAC file using Windows Media Player 11.

Please use a different server.

 Are you trying to playback a FLAC file using Windows Media

Player 12? It is not possible to playback a FLAC file using

Windows Media Player 12. Please use a different server.

 The component connected to the network is not properly

operated. Check whether the component is affected by special

circumstances or is in the sleep mode. Try rebooting the

component if necessary.

 The component connected to the network does not permit file

sharing. Try changing the settings for the component

connected to the network.

 The folder stored on the component connected to the network

has been deleted or damaged. Check the folder stored on the

component connected to the network.

 Network connections could be restricted due to the

computer’s network settings, security settings, etc. Check the

computer’s network settings, security settings, etc.



Cannot access Windows Media Player 11 or Windows

Media Player 12.

 In case of Windows Media Player 11: You are currently logged

onto the domain through your computer with Windows XP or

Windows Vista installed. In case of Windows Media Player 12:

You are currently logged onto the domain through your

computer with Windows 7 or 8 installed. Instead of logging

onto the domain, log onto the local machine.



Audio playback is undesirably stopped or disturbed.

 The audio file currently being played back was not recorded in

a format playable on this unit. Check whether the audio file

was recorded in a format supported by this unit. Check

whether the folder has been damaged or corrupted. Even audio

files listed as playable on this unit may sometimes not be

played back or displayed (page 38).

 The LAN cable is currently disconnected. Connect the LAN

cable properly (page 11).

 There is heavy traffic on the network with the Internet being

accessed on the same network. Use 100BASE-TX to access the

components on the network.

 When in the DMR mode, depending on the external controller

being used, playback may be interrupted when a volume

operation is performed from the controller. In this case, adjust

the volume from the unit or remote control.

 There is a connection routed through a wireless LAN on the

same network. There may be a shortage of bandwidth on the

2.4 GHz band used by the wireless LAN. Make wired LAN

connections not routed through a wireless LAN. Install away

from any devices emitting electromagnetic waves on the 2.4

GHz band (microwave ovens, game consoles, etc.). If this does

not solve the problem, stop using other devices that emit

electromagnetic waves.



Cannot listen to Internet Radio stations.

 The firewall settings for components on the network are

currently in operation. Check the firewall settings for

components on the network.

 You are currently disconnected from the Internet. Check the

connection settings for components on the network, and

consult with your network service provider if necessary

(page 11).

 The broadcasts from an Internet Radio station are stopped or

interrupted. Some Internet radio stations on the list of Internet

Radio stations for this unit (page 27) may occasionally not be

available for listening.

 The unit only supports broadcast stations that use HTTP. It may

therefore be unable to playback certain broadcast stations.



Cannot pause at Music Server/DMR.

 For some DLNA server software/NAS, or file formats being

played, you many not be able to pause. Please contact the

DLNA server software manufacturer or NAS manufacturer that

you are using.



Music Server (DLNA) album names and artist names are not

displayed.

 Metadata such as album names and artist names have to be

approved by the server and distributed to the unit, which

depends on the NAS you are using and the specs of DLNA

server software. Supported files differ depending on NAS and

DLNA server software. For more details, please contact the

NAS manufacturer or DLNA server software manufacturer.



Music Server (DLNA) artwork is either displayed or not

displayed.

 In the case of the Music Server, this depends upon the specs

of DLNA server software.

Supported files differ depending on DLNA server software. For

more details, please contact the DLNA server software

manufacturer.



This unit cannot be selected from the Spotify application.

 An Internet connection is required for both the mobile digital

device and this unit.

 Connect the mobile digital device by Wi-Fi to the wireless LAN

router of the same network as the one to which this unit is

connected.

 A Spotify Premium account (for a charge) must be registered

on the Spotify application.

 When this unit is in standby, it cannot be selected from the

Spotify application.



The sound of the Spotify audio stream is not produced.

 Check whether this unit is selected on the Spotify application.

 Check that contents are playing on the Spotify application.

 If the above does not solve the problem, turn this unit’s power

off then back on.



This units volume does not increase when the volume

slider in the Spotify application is raised.

 There is an upper limit to the volume to prevent the volume

from being too high accidentally. To raise the volume higher in

this case, do so by operating the remote control. When using

1 ... 32 33 34 ... 42

Comments to this Manuals

No comments

Pioneer N-50 Operations Instructions Page 33

Comments to this Manuals

Related products and manuals for Headphone amplifiers Pioneer N-50