Pioneer N-50 Operations Instructions download pdf (Page 34)

Additional information

an application such as Pioneer ControlApp, the volume can

also be increased from the application.



Playback continues on this unit when the Spotify

application is quit.

 The Spotify audio stream continues from this unit, even when

the Spotify application is quit. To operate again, relaunch the

Spotify application.



Cannot perform gapless playback.

 Confirm that the conditions for gapless playback have been

met (page 39).

Wireless LAN



Network cannot be accessed via wireless LAN.

 Wireless LAN converter’s power is not on. (Wireless LAN

converter’s Power, WPS and Wireless indicators are not all

lit.) Check that the USB cable connecting the wireless LAN

converter to the player’s DC OUTPUT for WIRELESS LAN

terminal is properly connected (page 12).

 W-LAN Error is displayed on the unit’s display window. There

is a problem with the wireless LAN converter’s power supply.

Turn the unit’s power off, then disconnect the USB cable,

reconnect the USB cable and turn the unit’s power back on. If

W-LAN Error is still displayed after repeating the above

procedure several times, there is a problem with the unit or the

USB cable. Unplug the unit from the wall and call a Pioneer

authorized independent service company.

 The LAN cable is not firmly connected. Firmly connect the LAN

cable (page 12).

 Wireless LAN converter and base unit (wireless LAN router,

etc.) are too far apart or there is an obstacle between them.

Improve the wireless LAN environment by moving the wireless

LAN converter and base unit closer together, etc.

 There is a microwave oven or other device generating

electromagnetic waves near the wireless LAN environment.

Use the system in a place away from microwave ovens or

others device generating electromagnetic waves. Avoid using

devices generating electromagnetic waves as much as

possible when using the system with the wireless LAN.

 Multiple wireless LAN converters are connected to the

wireless LAN router. When connecting multiple wireless LAN

converters, their IP addresses must be changed.

 Wireless LAN connections cannot be established between the

wireless LAN converter and base unit (wireless LAN router,

etc.). The wireless LAN converter must be set in order to

establish wireless LAN connections. See Connecting using

wireless LAN on page 12.



Network cannot be accessed via wireless LAN.

 The IP address settings of the player and wireless LAN

converter do not match the settings of the wireless LAN router,

etc. Check the IP address settings of the player and wireless

LAN converter (including the DHCP setting). If the player’s

DHCP setting is on, turn the player’s power off, then turn the

power back on. Check that the IP address of the player and

wireless LAN converter matche the settings of the wireless

LAN router, etc. If the player’s DHCP setting is off, set an IP

address matching the network of the base unit (wireless LAN

router, etc.). For example, if the wireless LAN router’s IP

address is “192.168.1.1”, set the player’s IP address to

“192.168.1.XXX” (*1), the subnet mask to “255.255.255.0”, the

gateway and DNS to “192.168.1.1”. Next, set the wireless LAN

converter’s IP address to “192.168.1.249” (*2).

(*1) Set the “XXX” in “192.168.1.XXX” to a number between 2

and 248 that is not assigned to other devices.

(*2) Set the “249" in “192.168.1.249” to a number between 2 and

249 that is not assigned to other devices.

 Try making the wireless LAN converter’s advanced settings.

The wireless LAN converter can be connected to a computer to

make the advanced wireless LAN settings. For details, see the

CD-ROM included for the wireless LAN converter. Check the

settings of the wireless LAN router, etc., then change the

settings of the wireless LAN converter. Note, however, that

making the advanced wireless LAN settings will not

necessarily improve the wireless LAN environment. Be careful

when changing the settings.

 The access point is set to conceal the SSID. In this case, the

SSID may not be displayed on the access point list screen. If

not, set the SSID, etc., by making the wireless LAN converter

settings on the receiver manually.

 The access point’s security settings use WEP 152-bit length

code key or shared key authentication. The player does not

support WEP 152-bit length code key or shared key

authentication.

 Network connections cannot be established even when the

above measures are taken. Reset the wireless LAN converter.

After this, redo the wireless LAN converter's settings.

About resetting

1. Check that the wireless LAN converter’s power is on.

2. Press the wireless LAN converter’s reset button for at least

three seconds.

3. Release the reset button.

When the wireless LAN converter is restarted, the resetting

procedure is completed.

USB DAC



No sound output from the USB DAC In input.

 Is your computer currently set to select a different device?

Check the settings on your computer.

 Is your computer set to mute? Check the settings on your

computer.

 Is it connected properly? Check the connection.

 The computer does not detect the unit. If you switch to the

unit’s USB DAC In input after connecting to your computer,

your computer’s sound settings may be set to something other

than this unit. In this case, reselect the unit.

 File format, OS or software are not supported. Check

supported OS, software and file sampling frequencies.

 The special driver is not installed on your computer. You must

have the special driver installed on your computer. Please visit

the Pioneer home page for more details.

http://www.pioneer.co.uk, http://www.pioneer.eu



The sampling frequency from the USB DAC In input is

always exactly the same.

 Depending on the settings on your computer, even files with

differing sampling frequencies may be output after being

converted to the same sampling frequency. Check the settings

on your computer.



Computer sounds other than music can be heard through

the USB DAC In input.

 Depending on the settings on your computer, sounds such as

your computer’s boot up noise and error sounds by also be

played through the unit. Check the settings on your computer.



No audio form computer software is played back for any

input other than the USB DAC In input.

 Your computer will only recognize the unit when you are using

the USB DAC In input. Switch to the USB DAC In input and

then reselect the unit under your computer's sound settings.



When using the USB DAC In input, cannot play back high

quality sound files (files exceeding 48 kHz/24 bit, or DSD

files).

 The special driver is not installed on your computer. You must

have the special driver installed on your computer. Please visit

the Pioneer home page for more details.

http://www.pioneer.co.uk, http://www.pioneer.eu



When using the USB DAC In input, there is no audio output

when performing playback on the computer.

 Is the volume setting for your OS or application low? Increase

the volume setting.

1 ... 33 34 35 36 37 38 39 40 41 42

Comments to this Manuals

No comments

Pioneer N-50 Operations Instructions Page 34

Comments to this Manuals

Related products and manuals for Headphone amplifiers Pioneer N-50