Pioneer KRP-S01 User Manual download pdf (Page 4)

English

2. Screw an supplied screw into the

speaker mounting hole (lower of the

two) at the top, rear of the ﬂat screen

TV.

Do not tighten it all the way yet. Leave it loose, with

about 5 mm left to tighten.

5 mm

Speaker

Mounting

Hole

Top, rear of flat

screen TV

Top of flat screen TV

Leave a space of about 5 mm

3. Hang the speaker bracket on the

screw you installed at the top by

passing the wide part over it and

lowering into the slot; screw in the

lower screw temporarily.

After passing the wide part of the hole of the speaker

bracket (top) over the screw, lower the speaker onto it.

Tighten with the provided

screw the bottom

speaker bracket to the

flat screen TV temporarily

(one place bottom).

After passing the

wide part of the

hole over the screw,

lower the speaker.

4. Adjust the position of the speaker

and then tighten the upper and lower

screws ﬁrmly.

5. Tighten the two screws, at the top

and bottom for each speaker (total of

four screws), thus ﬁxing the speakers

to the ﬂat screen TV.

6. Pass the supplied speaker cable

between the speaker and the ﬂat

screen TV (below the speaker bracket)

from below.

7. Connect the speaker cables to the

speaker (see next page).

8. Insert the cable in the groove on the

speaker.

Speaker Cable

Speaker

Terminal

Insertion

in groove

9. Connect the other end of the speaker

cables to the rear of ﬂat screen TV (see

next page).

1 2 3 4 5 ... 50

Comments to this Manuals

No comments

Pioneer KRP-S01 User Manual Page 4

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer KRP-S01