Pioneer PRV-LX1 Technical Information download pdf (Page 27)

Condition Check Counter

Measure

Standby light changes

to green but no

startup.

Check FL display and

monitor output.

If no display or

monitor check

CPU, memory

module and BIOS

short pin.

(1 & 2 JP14) and

FLKB assy.

Press F1 to load a

new BIOS value.

No startup “Please

Wait” on display.

Check CMOS checksum

error on VGA screen.

Check 2.5V

Battery.

Connect VGA and read

screen messages.

If error reads (non-

system disc) replace

hard disc drive.

“Detecting IDE

Drivers”

Displays on PC

screen.

Check all drives. Disconnect DVDR

drives one by one,

possible defective

drive hanging

startup.

“Please Wait”

flashing on front

panel display when

the standby power

switch has been

pressed and power

cannot be shutoff.

Connect VGA and read

messages. “Boot Disc

failure, insert system disc

and press enter”.

Check DC supply to

hard disc drive and

flat IDE cable.

Replace drive.

“Please Wait”

flashing on front

panel and constant

beep sound.

No display on monitor and

no VGA output.

Memory module

could be dislodged

of defective. Or

possibly defective

main board.

On the FL display

errors read >>>>>>>

FSCK-ERROR BOOT/USR

FSCK-ERROR HOME

FSCK-ERROR VAR

POWER ON FSCK-ERROR

Operating system

needs to be

reinstalled or hard

disk replaced

26.

1 ... 26 27 28 ... 38

Comments to this Manuals

No comments