Pioneer VSX-452 User Manual download pdf (Page 16)

MANUAL TUNING

Each time the TUNING button "+" or "-" is pressed, the tuning

frequency changes by one step, allowing you to find stations manually.

1. Use the BAND FM/AM button to choose either FM or AM.

2. Press TUNING "'-'" or ""+ "" button and release quickly.

• The tuning frequency will change by one stepeach time the button

ispressed. Pressas many times as necessaryto tune inthe desired

station. The TUNED indicator lights up when the station is tuned

in best.

• If you keep the TUNING button pressed after the AUTO TUNING

indicator has gone out, the reception frequency changes

continuously and stops when the button is released.

NOTE."

The TUNED indicator may not light w_h broadcasts received over long

distances, or when the broadcast signals are extremely weak.

3. Adjust the volume and tone as desired.

I PRESET TUNING

] FREQUENCY PRESETTING I

1. Tune in the desired station.

• See the section "DIRECT ACCESS TUNING" for information on

reception using the Direct Access Tuning mode.

• See the section "AUTO TUNING" for information on reception

using the Auto Tuning mode.

• See the section "MANUAL TUNING" for informationon reception

using the Manual Tuning mode.

Inadditionto station frequencies, the MPX MODE (AUTO/MONO)

can also be preset (FM only).

2. Press the MEMORY button.

3. Press the STATION CALL button into which you wish to preset

the station.

• Use the STATION CALL buttons (* 1 - "9, *0) to select a preset

channel. One press selects the 1 -- 10 range, two presses

LISTENING TO BROADCASTS USING PRESET

TUNING

1. Press the STATION CALL button into which the desired station

has been preset.

• When the input selector is set to a function other than TUNER,

it will switch to the TUNER function automatically if one of the

STATION CALL buttons is pressed.

Tuning can be performed simply and accurately following the

above procedure.

2. Adjust the volume and tone as desired.

NO TE:

The contents of the STATION CALL button willbe retained for several

days, even if the receiver power cord is unplugged.

ff a preset station has been erased, preset it again.

11 -- 20, and three presses 21 -- 30.

[Example] If you press button [_ :

Once -- 3 ch

Twice -- 13 ch

Three times -- 23 ch

Press a STATION CALL button within two seconds.

4. Repeat steps 1 to 3 to preset additional stations.

Last station memory

When the POWER switch is pressed to turn the power on, the last

station received before the power was previously turned off will be

tuned in again.

When the power is ON, if the BAND FM/AM button is pressed, the

last station received before the BAND FM/AM button was previously

Total of 30 AM and FM stations may be preset. When you store

a new preset, it takes the place of the previously stored station

(if any).

pressed will be tuned in again.

MEMORY SCAN J

Broadcast stations memorized under the STATION CALL buttons are

recalled in order at about five second intervals.

Set the input selector to TUNER, and press the remote control SCAN

button.

When you aretuned into a broadcast station you want, press the SCAN

button once more. This stops memory scan.

RECEIVING FM SlMULCAST TV PROGRAMS

By combining a "IV set and a VCR (or TV tuner), you can receive FM

simulcastrv programs (stereo TV sound transmitted from an FM radio

station] while viewing the video portion on your TV.

1. Select the desired TV program with the TV set.

2. Tune in the desired FM simulceet TV program on the receiver.

3. Adjust the volume and tone controls as desired.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Pioneer VSX-452 User Manual Page 16

Comments to this Manuals

Related products and manuals for Supplementary music equipment Pioneer VSX-452