Pioneer DVD-R7322 User Manual download pdf (Page 8)

8

En

Drive

Lock lever

Guide rails

1. When inserting a drive, be sure to

place the drive on the changer guide

rails and push the drive in until the

lock lever on the drive shifts to the

locked position. Maybe you can hear

a clicking sound then.

When a drive is to be removed from the

changer, flip the lock lever to the released

position and then pull the drive out from the

changer.

A HARDWARE TOUR

0

TOP VIEW

0 Function switch

TO INSTALL THE DRIVE

For instructions on how to open the access

doors, see the operating instructions for the

DRM-7000 disc changer.

Before installation, be sure to specify the

following settings at the rear of each drive

to be installed.

¶ SCSI ID assignment

Specify the SCSI IDs to be used so as

to ensure that the same SCSI ID is not

assigned by more than one drive on the

same SCSI bus.

¶ Termination

Set the termination switch of the last

drive in the SCSI chain to the ON

position.

Warning about static electricity

Always be sure never to touch the

contacts or ports when operating

drives.

Also be sure to touch a metallic surface

on the changer before installing

additional drives to the changer.

This switch is used to check the

device before shipment, and its

setting should never be changed.

¶ Set OFF at the time of shipping from the plant.

ON OFF

1 2 3 4 5 6 7 8 9 ... 36

Comments to this Manuals

No comments