Pioneer AVM-P8000R User Manual download pdf (Page 84)

83

The power switch does not

work.

No functions come on.

The remote control does

not work.

No sounds are heard.

The volume level will not

rise.

No images come on.

Cables or connectors are not

correctly connected.

The fuse is broken.

The battery power is running

out.

The remote control is not in the

correct operation mode.

Cables are not connected correctly.

The volume is turned all the

way down.

The front, rear, left and right

speakers are not properly

adjusted in level balance.

The parking brake cord is not

connected.

The parking brake is not

engaged.

Check whether the cables are

plugged in correctly and firmly.

Remove the cause of the break-

ing of the fuse, then replace the

fuse. Be very sure the same

rated proper fuse is installed.

Replace the batteries.

(See page 8.)

Switch the remote control to the

proper mode. (See page 3.)

Connect the cables correctly.

Increase the volume.

(See page 10.)

Adjust the relative levels

between the speakers correctly.

(See page 68.)

Connect the parking brake cord

and engage the parking brake.

Troubleshooting

7 General

Symptom Cause Remedy

If the problem still

remains.

Request repairs.

\

If the problem

remains even after

checking.

Reset the unit. (See

page 7.)

\

If you think there is

something wrong

with the unit.

Before requesting

repairs, check the

following chart.

Troubleshooting

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 99 100

Comments to this Manuals

No comments