Pioneer AVM-P8000R User Manual download pdf (Page 77)

Changing the Initial Settings

Continued overleaf.

Changing the FM Tuning Step

Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to

100 kHz when the AF or TA mode is activated.

It may be preferable to set tuning step to 50 kHz in the AF mode.

1. Check to see “FM” is currently highlighted.

If not, select that option by moving the joystick.

“FM” is highlighted in green.

2. Click the joystick.

Each click toggles 100 kHz/50 kHz.

Note:

• The tuning step remains set at 50 kHz during Manual tuning.

• The tuning step returns to 100 kHz if the battery is temporarily disconnected.

Setting the DAB Priority Function

When a Hide-away DAB tuner (e.g. GEX-P900DABII) is connected, you can set the product

in this mode so that the interruption of traffic information from the Hide-away DAB tuner

takes precedence over this product’s RDS Traffic Announcement (TA) function.

When it is ON

• During DAB reception, when the selected Service Component supports Road Traffic Flashes and

Transport Flashes, reception is not interrupted by this product’s RDS Traffic Announcement (TA).

When it is OFF

• Interruption is by the first received news flash from among this product’s RDS and the hide-away

DAB traffic information broadcasts.

1. Select “DAB” by moving the joystick.

“DAB” is highlighted in green.

2. Click the joystick.

Each click toggles DAB On/Off.

Note:

• You can only select to the DAB Priority Setting mode when a separately sold Hide-away

DAB tuner (e.g. GEX-P900DABII) is connected.

Switching the Auto PI Seek

During Preset Station PI Seek operation, you can switch the Auto PI Seek function ON/OFF.

(Refer to “PI Seek Function” on page 27.)

1. Select “AUTO PI” by moving the joystick.

“AUTO PI” is highlighted in green.

2. Click the joystick.

Each click toggles AUTO PI On/Off.

1 ... 76 77 78 ... 100

No comments

Pioneer AVM-P8000R User Manual Page 77