Pioneer SPH-DA02 User Manual download pdf (Page 16)

Installation with the holder

and side bracket

1 Install the holder into the dashboard.

After inserting the holder into the dashboard,

select and bend the tabs appropriate to the

thickness of the dashboard material. (Install

this product as firmly as possible using the

top and bottom tabs. To secure this product,

bend the tabs 90 degrees.)

Dashboard

Holder

2 Install this product and fasten the

screws.

Rubber bush Dashboard

Double-ended screw Screw (2.6 mm × 5 mm)

3 Attach the trim ring.

Trim ring

Installation using the screw

holes on the side of this product

1 Remove the side brackets.

Side bracket

Screw for fixing the side bracket

(5 mm × 7 mm)

2 Fastening the unit to the factory radio-

mounting bracket.

Position this product so that its screw holes

are aligned with the screw holes of the brack-

et, and tighten the screws at three or four loca-

tions on each side.

Use either the truss head screws (5 mm ×

6 mm) or flush surface screws (5 mm ×

7 mm), depending on the shape of the brack-

et’s screw holes.

Engb

Section

Installation

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 151 152

No comments

Pioneer SPH-DA02 User Manual Page 16