Pioneer SPH-DA02 User Manual download pdf (Page 21)

After installing this product

1 Reconnect the negative (–) terminal of

the vehicle’s battery.

First, double-check that all connections are

correct and that this product is installed cor-

rectly. Reassemble all vehicle components

that you previously removed. Then reconnect

the negative (–) cable to the negative (–) term-

inal of the battery.

2 Start the engine.

3 Open the cover of the microSD card

slot.

Press the right side of the cover. The left side

of the cover pops up slightly, so pull it out

gently.

4 Press the reset button.

Press the reset button on this product with a

pointed object such as the tip of a pen.

5 Make the following settings.

= For details concerning operations, refer to

Operation Manual.

1 Set the language.

2 Drive an unobstructed road until the GPS

starts receiving the signal normally.

3 Make some necessary adjustments.

! Setting the time

! Setting the units and the date format,

etc.

! Change other settings as you prefer

Note

After installing this product, be sure to check at a

safe place that the vehicle is performing normal-

ly.

Engb

English

Section

After installation

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 151 152

No comments

Pioneer SPH-DA02 User Manual Page 21