Pioneer DEH-3200UB User Manual download pdf (Page 14)

The playback speed of audiobook can be changed.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select your favorite setting.

! Faster – Playback faster than normal speed

! Normal – Playback in normal speed

! Slower – Playback slower than normal speed

3 Press M.C. to confirm the selection.

S.Rtrv (sound retriever)

! Refer to S.Rtrv (sound retriever) on page 11.

Notes

! Operation is complete even if the menu is can-

celled before being confirmed.

! Switching the control mode to iPod pauses

song playback. Operate the iPod to resume

playback.

! The following functions are still accessible

from the unit even if the control mode is set to

iPod.

— Volume

— Fast forward/reverse

— Track up/down

— Pausing

— Switching the text information

! When the control mode is set to iPod, opera-

tions are limited as follows:

— Only CTRL (control mode), Pause (pause)

and S.Rtrv (sound retriever) functions are

available.

— Browse function cannot be operated from

this unit.

Audio Adjustments

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select AUDIO.

3 Turn M.C. to select the audio function.

After selecting, perform the following proce-

dures to set the audio function.

FAD/BAL (fader/balance adjustment)

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between fader and balance.

3 Turn M.C. to adjust the speaker balance.

Adjustment range (front/rear): F-F15 to F-R15

Adjustment range (left/right): B-L15 to B-R15

! F-0 is the proper setting when only two speak-

ers are used.

! Only for DEH-3200UB.

When the rear output setting and preout set-

ting are SUBW, you cannot adjust front/rear

speaker balance.

Preset EQ (equalizer recall)

1 Press M.C. to display the setting mode.

2 Turn M.C. to select an equalizer curve.

Powerful—Natural—Vocal—Custom1—Cus-

tom2—Flat—Super bass

! When Flat is selected no adjustments are

made to the sound.

3 Press M.C. to confirm the selection.

Graphic EQ (equalizer adjustment)

You can adjust the currently selected equalizer curve

setting as desired. Adjusted equalizer curve settings

are memorized in Custom1 or Custom2.

! A separate Custom1 curve can be created for

each source. If you make adjustments when a

curve other than Custom2 is selected, the equali-

zer curve settings will be memorized in Custom1.

! A Custom2 curve can be created common to all

sources. If you make adjustments when the Cus-

tom2 curve is selected, the Custom2 curve will

be updated.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between equalizer band and

level.

3 Press M.C. to switch to equalizer band and then

turn M.C. to select.

100Hz—315Hz—1.25kHz—3.15kHz—8kHz

4 Press M.C. to switch to level and then turn M.C.

to adjust.

Adjustment range: +6 to –6

Loudness (loudness)

Loudness compensates for deficiencies in the low-

and high-frequency ranges at low volume.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

OFF (off)—Low (low)—Mid (mid)—High (high)

3 Press M.C. to confirm the selection.

SW setting 1 (subwoofer on/off setting)

Operating this unit

En

14

Section

02

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 115 116

Comments to this Manuals

No comments