Pioneer SC-LX77-K User Manual Page 55
- Page / 139
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
55
05
Basic playback
Playing music from a computer
SC-LX87 only
Use this function to play digital audio input to the unit’s rear panel USB-DAC IN terminal.
Important
! When switching this unit’s input from USB-DAC to another input, first quit the computer’s music playback
application, then switch the input.
! The exclusive driver must be installed on the computer in order to play high sound quality files of over
48 kHz/24 bits and DSD files.
The driver software is provided on the included CD-ROM (AVNavigator).
1 Press u STANDBY/ON to switch on the receiver and your computer.
See Using a USB cable to connect to a computer on page 42.
2 Use INPUT SELECT c/d to select USB-DAC.
You can also use the INPUT SELECTOR dial on the front panel.
3 Begin playback on the computer.
Notes
! Output from the OPTICAL OUT terminal is not supported during USB-DAC IN input.
! In addition to LPCM, DSD with DoP transmission is also supported. The supported format is 2.8 MHz, 1 bit.
Only two channels, including LPCM, are supported.
! Playback cannot be controlled from this unit during use of this function; use your computer to control
playback.
! When disconnecting the USB cable, always stop playback on the computer first.
! Sound may not be produced if your computer does not support USB 2.0 HS.
! This unit does not support use of a USB hub. Always use a USB cable to connect the unit directly to the
computer.
About playable file formats
The USB-DAC function of this receiver supports the following file formats. Note that some file formats are not
available for playback although they are listed as playable file formats.
Category Stream
LPCM LPCM
Sampling frequency
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz,
176.4 kHz, 192 kHz
Quantization bitrate 16 bit, 24 bit, 32 bit
Channel 2 ch
DSD
DSDIFF
DSF
Sampling frequency 2.8 MHz
Quantization bitrate 1 bit
Channel 2 ch
! PCM 176.4 kHz and DSD file audio signals cannot be output to ZONE 2 and ZONE 3.
! With DSD playback, only the DoP standard is supported. A PC player supporting the DoP standard is required. Only native
playback is supported for DSD.
! When Speaker System is set to 7.1ch + Speaker B or 5.1ch + SP-B Bi-Amp, the audio signals of DSD files are not output to
Speaker B.
! When a USB-DAC input is selected in ZONE 2 or ZONE 3, DSD files and PCM signals with a sampling frequency of 176.4 kHz
cannot be played.
Listening to the radio
The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and
manual (step) tuning functions. If you already know the frequency of the station you want, see Tuning directly to a
station below. Once you are tuned to a station you can memorize the frequency for recall later-see Saving station
presets on page 56 for more on how to do this.
1 Press TUNER to select the tuner.
2 Use BAND to change the band (FM or AM), if necessary.
3 Tune to a station.
There are three ways to do this:
! Automatic tuning – To search for stations in the currently selected band, press and hold TUNE +/– for about
a second. The receiver will start searching for the next station, stopping when it has found one. Repeat to
search for other stations.
! Manual tuning – To change the frequency one step at a time, press TUNE +/–.
! High speed tuning – Press and hold TUNE +/– for high speed tuning. Release the button at the frequency
you want.
Improving FM sound
If the TUNED or STEREO indicator doesn’t light when tuning to an FM station because the signal is weak, press
MPX to switch the receiver into mono reception mode. This should improve the sound quality and allow you to
enjoy the broadcast.
Using the noise cut mode
The two noise cut modes can be used when receiving AM broadcasts. Press MPX to select the noise cut mode (1
to 2).
Tuning directly to a station
1 Press TUNER to select the tuner.
2 Use BAND to change the band (FM or AM), if necessary.
3 Press D.ACCESS (Direct Access).
4 Use the number buttons to enter the frequency of the radio station.
For example, to tune to 106.00 (FM), press 1, 0, 6, 0, 0.
If you make a mistake halfway through, press D.ACCESS twice to cancel the frequency and start over.
- SC-LX77-K/-S 1
- SC-LX87-K/-S 1
- K058a_A1_En 2
- Contents 3
- 11 The Advanced MCACC menu 4
- 14 Additional information 4
- Important 5
- Checking what’s in the box 7
- Our philosophy 7
- Features 7
- Installing the receiver 9
- Loading the batteries 9
- Before you start 10
- Controls and displays 11
- Front panel 15
- Connecting your equipment 17
- Rear panel 18
- Placing the speakers 22
- Connecting the speakers 22
- Bi-amp compatible speaker 25
- Front right 25
- Front left 25
- About the audio connection 29
- Video signals 30
- Select one 33
- HDMI/DVI-compatible monitor 34
- CD player, MD, DAT, etc 35
- Turntable 35
- DVD player, etc 36
- 75 Ω coaxial cable 37
- Outdoor antenna 37
- Indoor antenna 37
- (vinyl-coated wire) 37
- 5 m to 6 m 37
- AUDIO IN 38
- LINE LEVEL 38
- VIDEO IN 38
- Sub zone (ZONE 2) Main zone 39
- Sub zone (ZONE 3) Main zone 39
- Bluetooth® ADAPTER 41
- Connecting a USB device 42
- Connecting to a wireless LAN 43
- Connecting an IR receiver 43
- Plugging in the receiver 44
- Basic Setup 45
- SC-LX87 SC-LX77 46
- The Input Setup menu 47
- Operation Mode Setup 48
- About the Home Menu 49
- Basic playback 50
- AUTO/ALC/ 51
- DIRECT 51
- STANDARDADV SURR 51
- Playing an iPod 52
- ENTER, d 53
- Playing music from a computer 55
- Listening to the radio 55
- Listening to your system 59
- Selecting MCACC presets 62
- Choosing the input signal 62
- Introduction 66
- About HTC Connect 67
- Basic playback controls 67
- About network playback 69
- About playable file formats 70
- Control with HDMI function 71
- HDMI Setup 72
- Before using synchronization 73
- About synchronized operations 73
- Setting the PQLS function 73
- Using other functions 75
- Setting the Audio options 76
- Setting the Video options 78
- Using the MULTI-ZONE controls 80
- Using the sleep timer 82
- Dimming the display 82
- Switching the HDMI output 82
- Checking your system settings 82
- Resetting the system 83
- ALL ZONE STBY 85
- DISCRETE ON 85
- This receiver’s 86
- Other remote 86
- Direct function 87
- Setting the backlight mode 87
- (Discrete On) functions 87
- Controlling components 88
- TV and Audio/Video components 89
- Audio/Video components 89
- TV (Projector) 90
- The Advanced MCACC menu 91
- Automatic MCACC (Expert) 92
- Manual MCACC setup 94
- Checking MCACC Data 97
- Data Management 98
- Manual speaker setup 100
- Speaker Setting 101
- Channel Level 101
- Speaker Distance 102
- THX Audio Setting 102
- Network Setup menu 103
- The Other Setup menu 104
- Volume Setup 105
- Remote Control Mode Setup 105
- Software Update 105
- ZONE Setup 106
- On Screen Display Setup 106
- MHL Setup 107
- Troubleshooting 111
- No sound 111
- Other audio problems 112
- ADAPTER PORT terminal 113
- Settings 114
- Remote control 115
- AVNavigator 116
- USB interface 117
- Web Control 118
- Wireless LAN 119
- Additional information 120
- Surround sound formats 121
- About THX 121
- About HDMI 122
- HTC Connect 122
- About iPod 123
- Windows 8 123
- Software license notice 123
- Speaker Setting Guide 124
- Cleaning the unit 126
- Glossary 129
- Features index 132
- Specifications 133
- Preset code list 134
- © 2013 PIONEER CORPORATION 139
- All rights reserved 139
- <ARB7500-A> 139
Related products and manuals for Home Theater Systems Pioneer SC-LX77-K
Home Theater Systems Pioneer HTP-710 User Manual
(272 pages)
(272 pages)
Home Theater Systems Pioneer S-HS100 User Manual
(112 pages)
(112 pages)
© 2020, manymanuals.com. All rights reserved. | 0.724 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals