Pioneer DEH-P9650MP User Manual download pdf (Page 54)

1 Press FUNCTION to select Mute.

Press FUNCTION repeatedly until Mute ap-

pears in the display.

2 Press c or d to select the desired set-

ting.

Each press of c or d selects settings in the

following order:

TEL mute (muting) 10dB ATT (attenuation)

 20dB ATT (attenuation)

20dB ATT has a stronger effect than

10dB ATT.

Setting the FM tuning step

The FM tuning step employed by seek tuning

can be switched between 100 kHz, the preset

step, and 50 kHz.

1 Press FUNCTION to select

FM tuning step.

Press FUNCTION repeatedly until

FM tuning step appears in the display.

2 Press c or d to select the FM tuning

step.

Pressing c or d will switch the FM tuning

step between 100 kHz and 50 kHz. The se-

lected FM tuning step will appear in the dis-

play.

Note

If seek tuning is performed in 50 kHz steps, sta-

tions may be tuned in imprecisely. Tune in the sta-

tions with manual tuning or use seek tuning

again.

Setting the AM tuning step

The AM tuning step can be switched between

9 kHz, the preset step, and 10 kHz. When

using the tuner in North, Central or South

America, reset the tuning step from 9 kHz (531

 1,602 kHz allowable) to 10 kHz (530  1,640

kHz allowable).

1 Press FUNCTION to select

AM tuning step.

Press FUNCTION repeatedly until

AM tuning step appears in the display.

2 Press c or d to select the AM tuning

step.

Pressing c or d will switch the AM tuning

step between 9 kHz and 10 kHz. The selected

AM tuning step will appear in the display.

Switching the warning tone

If the front panel is not detached from the

head unit within five seconds of turning off the

ignition, a warning tone will sound. You can

turn off the warning tone.

1 Press FUNCTION to select

Warning tone.

Press FUNCTION repeatedly until

Warning tone appears in the display.

2 Press a or b to turn Warning tone on

or off.

Pressing a or b will turn Warning tone on or

off and that status will be displayed (e.g.,

Warning tone ON).

Switching the flap auto open

For theft protection, the front panel opens

automatically and easily detaches. Flap auto

open is on as a default.

Initial Settings

En

54

Section

09

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 220 221

Comments to this Manuals

No comments