Pioneer HTP-075 User Manual download pdf (Page 10)

Connecting your equipment

Making cable connections

Make sure not to bend the cables over the top of this unit (as

shown in the illustration). If this happens, the magnetic field

produced by the transformers in this unit may cause a

humming noise from the speakers.

Important

•

Before making or changing connections, switch off the

power and disconnect the power cord from the AC outlet.

•

Before unplugging the power cord, switch the power into

standby.

HDMI cables

Both video and sound signals can be transmitted

simultaneously with one cable. If connecting the player and

the TV via this receiver, for both connections, use HDMI

cables.

Be careful to connect the terminal in the proper direction.

Note

•

Set the HDMI parameter in Setting the Audio options on

page 25 to THRU (THROUGH) and set the input signal in

Selecting the audio input signal

on page 16 to HDMI, if you

want to hear HDMI audio output from your TV (no sound

will be heard from this receiver).

•

If the video signal does not appear on your TV, try

adjusting the resolution settings on your component or

display. Note that some components (such as video game

units) have resolutions that may not be displayed. In this

case, use a (analog) composite connection.

•

When the video signal from the HDMI is 480i, 480p, 576i

or 576p, Multi Ch PCM sound and HD sound cannot be

received.

About HDMI

The HDMI connection transfers uncompressed digital video,

as well as almost every kind of digital audio that the

connected component is compatible with, including DVD-

Video, DVD-Audio, SACD, Dolby Digital Plus, Dolby

TrueHD, DTS-HD Master Audio (see below for limitations),

Video CD/Super VCD and CD.

This receiver incorporates High-Definition Multimedia

Interface (HDMI

) technology.

This receiver supports the functions described below through

HDMI connections.

•

Digital transfer of uncompressed video (contents

protected by HDCP (1080p/24, 1080p/60, etc.))

•

3D signal transfer

•

Deep Color signal transfer

•

x.v.Color signal transfer

•

Audio Return Channel (see The HDMI Setup menu on

page 32)

•

Input of multi-channel linear PCM digital audio signals

(192 kHz or less) for up to 8 channels

•

Input of the following digital audio formats:

– Dolby Digital, Dolby Digital Plus, DTS, High bitrate audio

(Dolby TrueHD, DTS-HD Master Audio), DVD-Audio, CD,

SACD (DSD 2 ch only), Video CD, Super VCD

•

4K signal transfer

– This may not operate properly, depending on the

connected equipment.

– 4K 24p, 4K 25p, 4K 30p, 4K 50p and 4K 60p signals are

supported.

•

HDCP 2.2 compatible terminal

Note

•

Use a High Speed HDMI

®/

™ Cable. If HDMI cable other

than a High Speed HDMI

®/

™ Cable is used, it may not

work properly.

•

When an HDMI cable with a built-in equalizer is

connected, it may not operate properly.

•

3D, Deep Color, x.v.Color, 4K signal transfer and Audio

Return Channel are only possible when connected to a

compatible component.

•

HDMI format digital audio transmissions require a longer

time to be recognized. Due to this, interruption in the audio

may occur when switching between audio formats or

beginning playback.

•

Turning on/off the device connected to this unit’s HDMI

OUT terminal during playback, or disconnecting/

connecting the HDMI cable during playback, may cause

noise or interrupted audio.

The terms HDMI and HDMI High-Definition Multimedia

Interface, and the HDMI Logo are trademarks or registered

trademarks of HDMI Licensing, LLC in the United States and

other countries.

“x.v.Color” and are trademarks of Sony

Corporation.

HDMI

HTP-074_En.book 10 ページ２０１６年４月２５日　月曜日　午前１０時１２分

1 ... 9 10 11 ... 42

Comments to this Manuals

No comments

Pioneer HTP-075 User Manual Page 10

Comments to this Manuals

Related products and manuals for AV receivers Pioneer HTP-075