Pioneer HTP-075 User Manual download pdf (Page 30)

Home Menu

•

Subwoofer – LFE signals and bass frequencies of

channels set to SMALL are output from the subwoofer

when YES is selected (see notes below). Choose the

PLUS setting if you want the subwoofer to output bass

sound continuously or you want deeper bass (the bass

frequencies that would normally come out the front and

center speakers are also routed to the subwoofer). If you

did not connect a subwoofer choose NO (the bass

frequencies are output from other speakers).

When you’re finished, press

RETURN

You return to the Manual SP Setup menu.

Note

•

If you select SMALL for the front speakers, the subwoofer

will automatically be fixed to YES. Also, the center,

surround can’t be set to LARGE if the front speakers are

set to SMALL. In this case, all bass frequencies are sent

to the subwoofer.

•

If you have a subwoofer and like lots of bass, it may seem

logical to select LARGE for your front speakers and PLUS

for the subwoofer. This may not, however, yield the best

bass results. Depending on the speaker placement of your

room you may actually experience a decrease in the

amount of bass due to low frequency cancellations. In this

case, try changing the position or direction of speakers. If

you can’t get good results, listen to the bass response with

it set to PLUS and YES or the front speakers set to

LARGE and SMALL alternatively and let your ears judge

which sounds best. If you’re having problems, the easiest

option is to route all the bass sounds to the subwoofer by

selecting SMALL for the front speakers.

X.Over

•

Default setting: 200Hz

This setting decides the cutoff between bass sounds playing

back from the speakers selected as LARGE, or the

subwoofer, and bass sounds playing back from those

selected as SMALL. It also decides where the cutoff will be

for bass sounds in the LFE channel.

•

For more on selecting the speaker sizes, see Speaker

Setting on page 29.

Select ‘Manual SP Setup’ from the Home Menu.

Select ‘X.Over’ from the Manual SP Setup menu.

Choose the frequency cutoff point.

Frequencies below the cutoff point will be sent to the

subwoofer (or LARGE speakers).

When you’re finished, press

RETURN

You return to the Manual SP Setup menu.

Channel Level

Using the channel level settings, you can adjust the overall

balance of your speaker system, an important factor when

setting up a home theater system.

CAUTION

•

The test tones used in the Channel Level settings are

output at high volume.

Select ‘Manual SP Setup’ from the Home Menu.

Select ‘Channel Level’ from the Manual SP Setup

menu.

Select a setup option.

•

Manual – Move the test tone manually from speaker

to speaker and adjust individual channel levels.

•

Auto – Adjust channel levels as the test tone moves

from speaker to speaker automatically.

Confirm your selected setup option.

The test tones will start after you press

ENTER

. After

the volume increases to the reference level, test tones

will be output.

1.Manual SP Setup

Return

a.Speaker Setting

b.X.Over

c.Channel Level

d.Speaker Distance

1b.X.Over

Return

Frequency 200Hz

1.Manual SP Setup

Return

a.Speaker Setting

b.X.Over

c.Channel Level

d.Speaker Distance

1c.Channel Level

Test Tone Manual

Enter:Next Return

1c.Channel Level

Test Tone [ Manual ]

Please Wait . . .20

Caution

Loud test tones

will be output.

Return

HTP-074_En.book 30 ページ２０１６年４月２５日　月曜日　午前１０時１２分

1 ... 29 30 31 ... 42

Comments to this Manuals

No comments

Pioneer HTP-075 User Manual Page 30

Comments to this Manuals

Related products and manuals for AV receivers Pioneer HTP-075