Pioneer HTP-075 User Manual download pdf (Page 26)

Listening to your system

a. You can change the Sound Retriever feature at any time by

using

S.RETRIEVER

button.

b. The default setting when the USB input is selected is ON.

c. This setting works only with dual mono encoded Dolby Digital

and DTS soundtracks.

d. This is not displayed by default. You need to change some

settings on this unit to display the menu. (see Displaying the

Fixed PCM Setting menu on page 27).

The initial set

AUTO

is only available for Dolby TrueHD signals.

Select

MAX

MID

for signals other than Dolby TrueHD.

f. You shouldn’t have any problems using this with most SACD

discs, but if the sound distorts, it is best to switch the gain

setting back to 0 dB.

g. This feature is only available when the connected display

supports the automatic audio/video synchronizing capability

(‘lip-sync’) for HDMI. If you find the automatically set delay

time unsuitable, set A.DLY to OFF and adjust the delay time

manually. For more details about the lip-sync feature of your

display, contact the manufacturer directly.

Only available with 2-channel sources in

DOLBY PLII MUSIC

mode.

i. Only when listening to 2-channel sources in NEO:6 CINEMA

and NEO:6 MUSIC mode.

LFE ATT (LFE Attenuate)

Some Dolby Digital and DTS audio sources

include ultra-low bass tones. Set the LFE

attenuator as necessary to prevent the ultra-

low bass tones from distorting the sound from

the speakers.

The LFE is not limited when set to 0 dB,

which is the recommended value. When set

to –15 dB, the LFE is limited by the

respective degree. When OFF is selected, no

sound is output from the LFE channel.

0 (0 dB)

5 (–5 dB)

10 (–10 dB)

15 (–15 dB)

20 (–20 dB)

** (OFF)

SACD G. (SACD Gain)

Brings out detail in SACDs by maximizing the

dynamic range (during digital processing).

0 (0 dB)

+6 (+6 dB)

HDMI (HDMI Audio)

Specifies the routing of the HDMI audio

signal out of this receiver (AMP) or through to

a TV (THRU). When THRU is selected, no

sound is output from this receiver.

AMP

THRU

A.DLY (Auto Delay)

This feature automatically corrects the audio-to-

video delay between components connected

with an HDMI cable. The audio delay time is set

depending on the operational status of the

display connected with an HDMI cable. The

video delay time is automatically adjusted

according to the audio delay time.

OFF

C.WIDTH (Center Width)

(Applicable only when using a center speaker)

Spreads the center channel between the front right

and left speakers, making it sound wider (higher

settings) or narrower (lower settings).

Making the

C.WIDTH

setting “7” may cause no

sound to be output from the center channel.

0 to 7

Default: 3

DIMEN. (Dimension)

Adjusts the surround sound balance from

front to back, making the sound more distant

(minus settings), or more forward (positive

settings).

–3 to +3

Default: 0

Setting/What it does Option(s)

PNRM. (Panorama)

Extends the front stereo image to include

surround speakers for a ‘wraparound’ effect.

OFF

C.IMG (Center Image)

(Applicable only when using a center speaker)

Adjust the center image to create a wider

stereo effect with vocals. Adjust the effect

from 0 (all center channel sent to front right

and left speakers) to 10 (center channel sent

to the center speaker only).

0 to 10

Default: 3

(NEO:6 MUSIC),

10 (NEO:6

CINEMA)

Setting/What it does Option(s)

HTP-074_En.book 26 ページ２０１６年４月２５日　月曜日　午前１０時１２分

1 ... 25 26 27 ... 42

Comments to this Manuals

No comments

Pioneer HTP-075 User Manual Page 26

Comments to this Manuals

Related products and manuals for AV receivers Pioneer HTP-075