Pioneer SC-25 Operations Instructions download pdf (Page 90)

Using other functions

Setting the Video options

There are a number of additional picture settings you can

make using the VIDEO PARAMETER menu. The defaults,

if not stated, are listed in bold.

Important

• Note that if an option cannot be selected on the

VIDEO PARAMETER menu, it is unavailable due to

the current source, setting and status of the receiver.

• These functions do not affect inputs other than DVD,

TV/SAT, DVR, VIDEO1, and VIDEO2.

1 Set the remote control to the receiver operation

mode, then press

VIDEO PARAMETER

2Use

/

to select the setting you want to adjust.

Depending on the current status/mode of the receiver,

certain options may not be able to be selected. Check the

table below for notes on this.

3Use

/

to set it as necessary.

See the table below for the options available for each

setting.

4 Press

RETURN

to confirm and exit the menu.

Note

1 • All of the setting items can be set for each input function.

• Setting items other than V.CONV can only be selected when V.CONV is set to ON.

Setting What it does Option(s)

V.CONV

(Digital Video

Conversion)

Converts video signals for output

from the MONITOR OUT jacks

(including HDMI OUT connector)

for all video types (see page 28).

OFF

RES

(Resolution)

Specifies the output resolution of

the video signal (when analog

video input signals are output at

the HDMI OUT connector, select

this according to the resolution of

your monitor and the images you

wish to watch).

AUTO

PURE

480p/576p

720p

1080i

1080p

ASP

(Aspect)

Specifies the aspect ratio when

analog video input signals are

output at the HDMI output. Make

your desired settings while

checking each setting on your

display (if the image doesn’t match

your monitor type, cropping or

black bands appear).

THROUGH

NORMAL

PCINEMA

c,d

(PureCinema)

This setting optimizes the picture

for film material when the video

output is set to progressive.

Usually set to AUTO; but try

switching to OFF if the picture

appears unnatural.

Additionally, certain PAL movie

video (576i, 25 frames/second STB

video output or DVD disc playback,

etc.) that contain film progressive

material cannot be recognized as

such by this receiver.

AUTO

PAL

OFF

P.MOTION

c,d

(Progressive

Motion)

Adjusts the motion and still picture

quality when video output is set to

progressive.

–4 to +4

Default: 0

YNR

Adjusts the amount of noise

reduction (NR) applied to the Y

(brightness) component.

0 to +8

Default: 0

DETAIL

Adjusts how sharp edges appear. –4 to +4

Default: 0

SHARP

c,e

(Sharpness)

Adjusts the sharpness of the high-

frequency (detailed) elements in

the picture.

–4 to +4

Default: 0

BRIGHT

(Brightness)

Adjusts the overall brightness. –6 to +6

Default: 0

CONTRAST

Adjusts the contrast between light

and dark.

–6 to +6

Default: 0

HUE

c,f

Adjusts the red/green balance. –6 to +6

Default: 0

CHROMA

(Chroma

Level)

Adjusts saturation from dull to

bright.

–6 to +6

Default: 0

a.• When set to a resolution with which the TV (monitor) is not

compatible, no picture is output. Also, in some cases no picture will

be output due to copyright protection signals. In this case, change

the setting.

• When AUTO is selected, the resolution is selected automatically

according to the capacity of the TV (monitor) connected by HDMI.

When PURE is selected, the signals are output with the same

resolution as when input (At this time, video signals are only output

from the same type of terminals to which they were input).

• When a display is connected by HDMI, if this is set to something

other than PURE and 480i/576i analog signals are input, 480p/576p

signals are output from the component output terminals.

• Conversion to 1080p is only performed for 480i, 576i, 480p and

576p input signals.

b.• If the image doesn’t match your monitor type, adjust the aspect

ratio on the source component or on the monitor.

• This cannot be set when the resolution is set to PURE.

• NORMAL setting is only displayed when 480i/p or 576i/p video

signals are being input.

c.This setting is only displayed when 480i or 576i video signals are

being input.

d.This setting is only valid for component outputs.

e.This setting is not valid for HDMI outputs.

f. This setting is not displayed for component inputs.

Setting What it does Option(s)

SC-27_25.book Page 90 Monday, April 6, 2009 7:15 PM

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 153 154

Comments to this Manuals

No comments

Pioneer SC-25 Operations Instructions Page 90

Comments to this Manuals

Related products and manuals for AV receivers Pioneer SC-25