Pioneer DEH-P510UB User Manual download pdf (Page 30)

Setting the rear output and

subwoofer controller

This unit’s rear output (rear speaker leads out-

put and RCA rear output) can be used for full-

range speaker (Rear SP :F.Range) or subwoo-

fer (Rear SP :S/W) connection. If you switch

the rear output setting to Rear SP :S/W, you

can connect a rear speaker lead directly to a

subwoofer without using an auxiliary amp.

Initially, the unit is set for rear full-range speak-

er connection (Rear SP :F.Range).

1 Use MULTI-CONTROL to select

S/W control in the initial setting menu.

Refer to Adjusting initial settings on page 28.

2 Press MULTI-CONTROL to switch the

rear output setting.

Pressing MULTI-CONTROL will switch be-

tween Rear SP :F.Range (full-range speaker)

and Rear SP :S/W (subwoofer) and that status

will be displayed.

# When no subwoofer is connected to the rear

output, select Rear SP :F.Range (full-range speak-

er).

# When a subwoofer is connected to the rear

output, select Rear SP :S/W (subwoofer).

Notes

! Even if you change this setting, there is no

output unless you turn the subwoofer output

on (refer to Using subwoofer output on page

26).

! If you change this setting, subwoofer output

in the audio menu will return to the factory

settings.

! Both rear speaker lead outputs and RCA rear

output are switched simultaneously in this

setting.

Switching the sound

muting/attenuation

Sound from this system is muted or attenu-

ated automatically when the signal from the

equipment with mute function is received.

! The sound is muted or attenuated, MUTE

or ATT are displayed and no audio adjust-

ment is possible.

! Sound from this system returns to normal

when the muting or attenuation is can-

celed.

1 Use MULTI-CONTROL to select Mute in

the initial setting menu.

Refer to Adjusting initial settings on page 28.

2 Press MULTI-CONTROL to switch the tel-

ephone muting/attenuation.

Pressing MULTI-CONTROL will switch be-

tween TEL ATT (attenuation) and TEL mute

(muting) and that status will be displayed.

Setting the internal power

amplifier

This unit features high power amplifier. How-

ever, in particular system, external amplifiers

are used instead of internal amplifier. If you

use external amplifiers in order to establish a

multi-amp system, and don’t use internal am-

plifier, it is recommended to turn off the inter-

nal amplifier. Turning off internal amplifier

reduces the noise that comes from the beha-

vior of internal amplifier.

1 Display the initial setting menu.

2 Use MULTI-CONTROL to select

Built-in AMP in the initial setting menu.

Refer to Adjusting initial settings on page 28.

3 Press MULTI-CONTROL to turn the inter-

nal power amplifier on.

# To turn the internal power amplifier off, press

MULTI-CONTROL again.

Initial Settings

En

30

Section

04

1 ... 29 30 31 ... 218

Comments to this Manuals

No comments