Pioneer MEP-7000 User Manual Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 71
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
START PLAYBACK (Using normal connections)
33
En
English
Changing the playlist’s track order
1 Select the track you wish to move from the playlist.
2 Press the rotary selector dial.
A menu will appear in the right window.
3 Turn the rotary selector dial to select [MOVE TRACK], then
press the rotary selector dial.
A yellow line will be displayed.
4 Turn the rotary selector dial to the place you wish to move
the track.
5 Press the rotary selector dial.
The track selected in step 1 will be moved to before the track
selected in step 4, and the display will return to the playlist.
To delete tracks from a playlist
1 Select the track you wish to delete from the playlist.
2 Press the rotary selector dial.
A menu will appear in the right window.
3 Turn the rotary selector dial to select [DELETE TRACK], then
press the rotary selector dial.
The track will be deleted from the playlist.
A track cannot be deleted when it is set in the controller.
To close a playlist
1 When a playlist is open, press the select up (
) button.
To delete a playlist
All tracks recorded in the playlist will be deleted from the playlist.
1 Select the name of the playlist.
2 Hold the rotary selector dial depressed for one second or
more.
The [CANCEL], [RENAME], [ALL TRACK CLEAR] menu will
appear.
3 Turn the rotary selector dial and select [ALL TRACK CLEAR].
4 Press the rotary selector dial.
All tracks recorded in the playlist will be deleted from the
playlist (the playlist will be empty).
A track set in the controller cannot be deleted from the
playlist.
Saving a playlist
Whenever tracks are recorded, erased, or edited in a playlist, the
new playlist is automatically saved (saving occurs about five
seconds after an editing operation is performed, assuming no
further command input).
Editing the name of a playlist
1 Select the desired playlist
2 Hold the rotary selector dial depressed for one second or
more.
A menu will appear on the right side of the center display.
3 Use the rotary selector dial to select [RENAME], then press
the rotary selector dial.
4 Enters edit mode. Use the rotary selector dial to edit the
name of the playlist.
A maximum of 32 characters can be input.
Select up () button:
Delete previous character to cursor.
Select down () button:
Move cursor to next character.
Press rotary selector dial:
Save edited contents and leave editing mode.
Rotate rotary selector dial:
Select character type: Upper case lower case
numerals symbols
5 When editing is completed, press the rotary selector dial.
The playlist will flash, indicating that editing is completed.
NOTE
If the unit’s power is turned off immediate (within five
seconds) after editing a playlist, the results of the edit may
not be reflected properly.
MEMO
Two-byte characters are not supported.
For information on using a keyboard for editing, see the section
“TRACK SELECTION WITH A USB KEYBOARD” (P. 30).
MEP-7000_KU_EN.book 33 ページ 2008年7月31日 木曜日 午後8時39分
Page view 32
1 ... 32 33 34 ... 71

Comments to this Manuals

No comments