Pioneer MEP-7000 User Manual download pdf (Page 54)

USING DJ SOFTWARE

PREPARING YOUR DJ SOFTWARE PROGRAM

Before using your DJ software program, you must prepare your computer and the DJ software. Do not connect the MEP-7000 to your

computer until you have loaded the software driver!

CONTROLLING YOUR COMPUTER USING

THE DEDICATED COMMUNICATIONS

PROTOCOL

The MEP-7000 can be used to control not only the accessory DJS

software, but other DJ software programs supporting the MEP-

7000’s dedicated communications protocol.



Control in “Normal Style”

1 Connect to the computer.

When the USB connection with the computer is properly

established, the BROWSE screen’s [PC] icon will change to

active display.

2 Start the DJ software program.

The icon will not change.

For DJS:

When communication with DJS begins, the icon will change to

the [PC DJS] icon.

3 Designate the MEP-7000 as an audio output device in the DJ

software.

In “Normal style,” designating the MEP-7000 as an audio

output device will enable it to output tracks played from the DJ

software. Consult your supported DJ software’s instruction

manual for details regarding how to designate the MEP-7000

as an audio output device.

For DJS:

DJS can be used to designate the MEP-7000 as an audio

output device. Consult the “Normal Style” chapter of the DJS

Control Guide (PDF file on accessory CD-ROM) for details

regarding how to designate the MEP-7000 as an audio output

device.

MEMO

• Special driver software must be installed on your computer when using the DJ software. When using a computer with Windows

installed, install the special driver software found on the supplied CD-ROM (When using a computer with Mac OS installed, download

and install the special driver software provided at Pioneer’s website (listed below)).

• Pioneer’s website (listed below) provides up-to-date information on the driver software.

http://www.prodjnet.com/support/

Step

Normal

Style

Manipulator

Style

DJS

Dedicated

communication-

supported

DJ software

MIDI-supported

DJ software

Confirm computer’s setup and

operating environment.

Turn on computer power.

Install the driver.

Connect the MEP-7000 to your

computer.

See P.15 of this manual (“CONNECTIONS”).

See P.17 for Normal Style connections and P.18 for Manipulator Style connections.

Turn on power to the MEP-7000.

See P.49 of this manual (“ABOUT THE DRIVER PROGRAM”).

See P.44 of this manual (“ABOUT DJS

SOFTWARE”).

Computer operating system support is

limited to Windows Vista, Windows XP or

Windows 2000. DJS supports only the

Microsoft Windows OS.

Adjust the buffer size (ASIO). See P.51 of this manual (“ABOUT THE DRIVER PROGRAM,  Setting the buffer size”)

Consult the instruction manual for your DJ

software.

Computer operating system support is limited

to Windows Vista, Windows XP o

r Windows

2000 (For those using a Mac OS, 10.3.9 or

later).

Consult the instruction manual for your DJ

software.

Confirm “Correct USB

connection to computer?”.

See P.51 of this manual (“ABOUT THE DRIVER PROGRAM,  Confirming the driver version”).

Install the DJ software program. See P.44 of this manual (“ABOUT DJS

SOFTWARE”)

Startup the DJ software. See the DJS User’s Manual (PDF file on

accessory CD-ROM).

Set audio output device. See the DJS Control Guide (PDF file on

accessory CD-ROM).

Consult the instruction manual for your DJ

software.

Operate for DJ play

. See the DJS Control Guide fo

r basic

operating techniques.

* For information regarding center display

screen’s status and combined play with

other music sources (Normal Style), see

this manual.

MEP-7000_KU_EN.book 54 ページ２００８年７月３１日　木曜日　午後８時３９分

1 ... 53 54 55 ... 71

Comments to this Manuals

No comments

Pioneer MEP-7000 User Manual Page 54

Comments to this Manuals

Related products and manuals for DJ controllers Pioneer MEP-7000