Pioneer MEP-7000 User Manual download pdf (Page 39)

ADVANCED OPERATIONS SECTION

English



To delete a cue point or loop information from

memory

1 Press the CUE/LOOP CALL button.

When the CUE/LOOP CALL button is pressed, the cue point or

loop information is called up, and the unit enters the standby

mode at the cue or loop-in point.

2 At the cue or loop point you wish to delete, hold the CUE/

LOOP MEMORY button depressed for one second or more.

The [MEMO] indicator will go out and the designated cue point

or loop point information will be deleted.

• The information can be deleted from the BROWSE screen as

well (P. 29).

SCRATCH PLAY

When the jog mode is set to [SCRATCH], pressing and rotating the

top surface of the jog dial will cause playback to be performed in

proportion to the direction and speed of jog dial rotation.

1 Press the SCRATCH button.

The

SCRATCH

indicator will flash blue.

2 During playback, press the surface of the jog dial.

Playback will stop.

3 Rotate the jog dial in the direction and at the speed you wish

for playback to occur.

Playback will begin in the direction and at the speed

corresponding to the jog dial input.

4 Release hand from surface of jog dial.

Playback will return to its original speed.

SPIN PLAY

During playback with the jog mode set to [SCRATCH], either press

the surface of the jog dial or the play/pause () button to set the

pause mode, then rotate the jog dial quickly; playback will proceed

in response to the direction and speed of jog dial rotation, even if

you remove your hand from the dial.

JOG BREAK PLAY

When the jog mode is set to [JOG BREAK], the pressing and

rotating the surface of the jog dial causes effects to be applied to

the sound in proportion to the direction of rotation and rotation

speed.

1 Press the JOG BREAK button.

The JOG BREAK indicator will flash red.

2 During playback, touch and press the surface of the jog dial.

3 Rotate the jog dial.

4 Release hand from surface of jog dial.

The effect will stop and sound will return to its original

condition.

• Jog break play is not enabled when DJS or other DJ software

tracks are loaded.

EFFECT SCREEN

When the EFFECT button is pressed, the center display will show

the EFFECT screen, providing graphic expression to assist with

scratch play and jog break play.

[1] Scratch effect

When the jog mode is set to [SCRATCH], the screen on the

controller side switches to scratch effect mode.

A blue ball will rotate in response to the track playback.

• The ball normally rotates to the right. When playback direction

changes, the ball reverses direction, and when playback stops,

the ball’s rotation also stops.

1 During playback, press one of the function buttons

[SCRATCH/TRANS/BUBBLE].

EFFECT

Function buttons

MEP-7000_KU_EN.book 39 ページ２００８年７月３１日　木曜日　午後８時３９分

1 ... 38 39 40 ... 71

Comments to this Manuals

No comments

Pioneer MEP-7000 User Manual Page 39

Comments to this Manuals

Related products and manuals for DJ controllers Pioneer MEP-7000