Pioneer RCS-55 User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
Speaker Setup Guide
7
En
English
Front surround 3-spot setup
– This setup is ideal
when rear surround speaker placement isn't possible
or you want to avoid running long speaker cables in
your listening area. Use this setup together with the
Front Surround modes in page 23 to take advantage
of wall and ceiling reflections for a very realistic
surround effect.
1 Connect the speaker system.
Refer to
Connecting up
to connect the speakers properly.
Place them as shown in the diagram above for optimal
surround sound.
The base of each surround speaker fits into the circular
groove on the top of the front speakers as shown.
2 Secure the speaker wire.
After testing for the slack necessary to turn the speaker
(see the following step), use the groove provided to
secure the speaker wire as shown. Leave 5 cm of slack
from the speaker terminals so the upper (surround)
speaker can turn freely.
3 Turn the surround speakers towards the closest
wall, lining the arrows up for optimal Front
Surround.
Turn each surround speaker so that the
arrow at the
base is lined up with the
FRONT SURROUND
arrow on
the front speaker. This is only necessary with the
FRTMOVIE
or
FRTMUSIC
modes. With
EXTPOWER
(Extra Power), line up the
arrow with the
EXTRA
POWER
arrow (the surround speakers should be in the
same direction as the front speakers.). See
Using Front
Surround
on page 23 for more informations.
Caution
To prevent accidents, make sure the surround
speaker is placed securely on top of the front
speaker.
Please don't attach the speakers to the wall or
speaker stands for Front surround 3-spot setup.
Front
left
Receiver
subwoofer
Front
right
Surround
left
Surround
right
Center
Listening position
EXTPOWER
FRTMOVIE / FRTMUSIC
Introduction.book Page 7 Friday, July 8, 2005 2:28 PM
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 103 104

Comments to this Manuals

No comments