Pioneer RCS-55 User Manual Page 85
- Page / 104
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
The Initial Setup menu
08
85
En
English
From the Audio In screen, use the
/
buttons to select
a setting, then use the
/
buttons to adjust it.
•
NICAM Select
– If you want to record the non-NICAM
audio in a TV broadcast, select
Regular Audio
,
otherwise set to
NICAM
. (When set to
NICAM
, you
can still select
Regular Audio
using the
AUDIO
button. See
Changing audio channels
on page 51.)
•
Tuner Level
– Set to
Compression
if the audio level
from the built-in tuner is excessively high causing
distortion.
•
External Audio
– Select
Stereo
if the external audio
input is regular stereo, or
Bilingual
if each channel
carries a separate soundtrack.
•
Bilingual Rec
–
When recording a bilingual source
from an external input in Video mode or VR mode set
to
XP
, you can choose to record either the
A/L
(left),
or the
B/R
(right) audio channel.
Note
• Except in
XP
recording mode, if you’re recording in
VR mode, both channels will be recorded and you
can switch them as you like on playback.
Audio Out
Use the various Audio Out settings to make sure that the
digital audio output is compatible with the receiver
subwoofer (or other connected component). You may
need to check the operating instructions that came with
the connected component to see which digital formats
it’s compatible with.
From the Audio Out screen, use the
/
buttons to
select a setting, then use the
/
buttons to adjust it.
•
Dolby Digital
– If the connected component is Dolby
Digital compatible, set to
Dolby Digital
, otherwise
set to
Dolby Digital -> PCM
.
•
96kHz PCM
– If the connected component is
compatible with high sampling rate audio (88.2 / 96
kHz), set to
96kHz
, otherwise set to
96kHz -> 48kHz
.
•
DTS
– If the connected component has a built-in DTS
decoder, set to
On
, otherwise set to
Off
. (See also
Important
below.)
•
MPEG
– If the connected component is MPEG audio
compatible, set to
MPEG
, otherwise set to
MPEG ->
PCM
.
Important
• If you set
DTS
to
On
with a non-DTS compatible
amplifier, noise will be output when you play a DTS
disc.
• When set to
On
, there is no analog audio output
when playing a DTS DVD-Video disc.
• When playing a DTS audio CD (even when
DTS
is
Off
), noise is output from the analog outputs.
Do not
play this through your amplifier and speakers.
• When playing a DTS audio CD, make sure that
Stereo
is selected using the
AUDIO
button. See
Switching DVD soundtracks
on page 61.
Recording settings
Optimized Rec
• Default setting:
Off
Audio In
Stereo
Normal
A/L
External Audio
NICAM
Bilingual Rec
Tuner Level
NICAM Select
Basic
Disc
Video
Audio
Recording
Playback
Dolby Digital
96kHz PCM
DTS
MPEG
Audio
Audio Adjust
Audio In
Audio Out
Audio Out
Dolby Digital
96kHz PCM
DTS
MPEG
96kHz -> 48kHz
On
MPEG -> PCM
Dolby Digital
Basic
Disc
Video
Audio
Recording
Playback
Optimized Rec
Auto Chapter
DVD-RW Auto Init
Recording
DVR-230_UK.book Page 85 Thursday, July 7, 2005 7:20 PM
- DVR-230-AV 1
- IMPORTANT 2
- Features 4
- Speaker Setup Guide 6
- Wall mounting the front and 8
- Upper terminal Lower terminal 10
- Connecting up 11
- Remote control 13
- Using the remote control 15
- Before you start 16
- Basic operation 17
- Contents 19
- Controls and displays 20
- Getting started 21
- Listening to your system 22
- Using Front Surround 23
- Using Advanced Surround 23
- Listening in stereo 23
- Enhancing dialogue 24
- Adjusting the bass and treble 24
- Boosting the bass level 24
- Listening to the radio 25
- Surround sound settings 27
- Other connections 29
- Troubleshooting 31
- Playable Recordable 37
- Extra features for use with 40
- Easy connections 41
- Connecting other AV sources 46
- Plugging in 46
- Setup Navigator 50
- Setup is complete! 50
- Finish Setup 50
- Using the built-in TV tuner 51
- (DVD/CD hybrid disc) 52
- Playback 56
- Navigating discs 57
- Input Number 001/010 Track 58
- Frame advance/frame reverse 59
- The Play Mode menu 59
- Switching DVD soundtracks 61
- Switching audio channels 62
- Switching camera angles 62
- Recording 63
- Channel number 65
- Setting a timer recording 66
- Timer recording FAQ 69
- Recording from an external 69
- Initializing a DVD-RW disc 71
- Chapter 7 72
- Editing Titles (Title Edit) 72
- Title Name 73
- Navigation Mark (Navi Mark) 73
- Erase All 74
- The Initial Setup menu 76
- Disc settings 81
- Video settings 82
- Audio settings 84
- Recording settings 85
- Playback settings 86
- TV Preset code list 91
- Screen sizes and disc formats 92
- Frequently asked questions 95
- Time Zone list 96
- Language code list 97
- Country/Area code list 97
- Additional information 100
- Hints on installation 100
- Moving the recorder 100
- Glossary 100
- Specifications 102
- PIONEER CORPORATION 104
Related products and manuals for Home Theater Systems Pioneer RCS-55
Home Theater Systems Pioneer VSX-521 User Manual
(128 pages)
(128 pages)
Home Theater Systems Pioneer DCS-240 User Manual
(120 pages)
(120 pages)
Home Theater Systems Pioneer VSX-421 User Manual
(100 pages)
(100 pages)
Home Theater Systems Pioneer BCS-414 User Manual
(400 pages)
(400 pages)
© 2020, manymanuals.com. All rights reserved. | 0.146 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals