Pioneer SC-LX81 User Manual download pdf (Page 8)

Operations on the Receiver and Cable Connections (Continued)

2 Perform the “Full Auto MCACC” operation on the receiver. (See page 9 of the

receiver’s Operating Instructions.)

The setting here is not required if the “Full Auto MCACC” operation has already been performed before

connecting the RS-232C cable. Proceed to step 3.

3 From the receiver’s “Manual MCACC” menu, select “EQ Professional”, then select

“Reverb Measurement” to measure the room’s reverb characteristics.

(See page 51 of the receiver’s Operating Instructions.)

If you want to measure the room’s reverb characteristics, select “EQ OFF”, then select “START”.

If you want to measure the room’s reverb characteristics after equalization, first perform the “Full Auto

MCACC” operation, then select “EQ ON”, then “START”. (See page 23

Measure the room’s reverb characteristics after equalization with the microphone at the same position as

when the “Full Auto MCACC” operation was performed. The measurements are performed with the EQ

values stored in the MCACC memory selected on the receiver, so before measuring the reverb

characteristics, select the MCACC memory to be measured after equalization.

4 Select “Output PC” from “MCACC Data Check”. (See page 70 of the receiver’s

Operation Instructions.)

The message “Start the MCACC application on your PC” appears and the receiver enters transmission

standby mode. It is ready to send data to your PC.

This completes the preparations for sending the measurement data to your PC.

(To send the data, proceed to the next section Application Operations.)

Note

MCACC : M1.MEMORY 1

1c5a.Reverb Measurement

A/V RECEIVER

Exit Cancel

START

Reverb Measure with

: EQ OFF

MCACC : M1.MEMORY 1

1c5a.Reverb Measurement

A/V RECEIVER

Exit Cancel

START

Reverb Measure with

: EQ ON

Start the MCACC application on your PC.

2g.Output PC

Exit Cancel

A/V RECEIVER

a. Speaker Setting

b. Channel Level

c. Speaker Distance

2.MCACC Data Check

d. Standing Wave

e. Acoustic Cal EQ

f. Group Delay

g. Output PC

A/V RECEIVER

Exit Return

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 37 38

Comments to this Manuals

No comments

Pioneer SC-LX81 User Manual Page 8

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer SC-LX81