Pioneer XW-NAC3-R User Manual download pdf (Page 14)

iPod/iPhone playback03

14

En

SHUFFLE

2

Two iPod/iPhone units can be played

alternately with no break in sound (SHUFFLE

2

).

A bit before the currently playing iPod/iPhone

track ends, playback begins on the other iPod/

iPhone track and the volume is gradually

raised to fade in seamlessly (Cross fade).

During the SHUFFLE

2

operation, the order of

track playback is set by the shuffle function.

1 Connect two iPod/iPhone units to the

iPod/iPhone connector ports (

iPod a

,

iPod b

),

then press

iPod a

or

iPod b

.

2Press

MENU

to access the iPod/iPhone

menu.

3 Select the track area that you want to

play back, then press

ENTER

.

4Press .

The SHUFFLE

2

mode is set, and the SHUFFLE

2

indicator lights; the unit connected to the iPod

a connector port will playback.

A bit before the currently playing iPod/iPhone

track ends, the other iPod/iPhone unit begins

cross fade playback. The same operation is

repeated thereafter until all tracks on both

units have been played.

1

• To cancel the SHUFFLE

2

mode, press either

once again, or .

•The SHUFFLE

2

mode will also be canceled

if the function is switched to any another

input (including iPod a or iPod b).

HI-LITE Scan

Each track is played back for a few seconds at

a certain time from the track beginning, thus

allowing desired tracks to be found quickly.

1 Connect an iPod/iPhone to the iPod/

iPhone connector ports, then press

iPod a

or

iPod b

.

2 Press

MENU

to access the iPod/iPhone

menu.

3 Select the track area that you want to

play back, then press

ENTER

.

4 Press

HI-LITE

.

HI-LITE scan function will begin from the first

track on the selected iPod/iPhone.

If playback was already underway, the HI-LITE

scan will begin from the currently playing

track.

After a track is played for a few seconds, the

next track will be found and a certain time

2

from the track beginning will be played for a

few seconds.

When two iPod/iPhone units are connected

simultaneously, the first track on the alternate

iPod/iPhone will be found and a certain time

from the track beginning will be played for a

few seconds.

Thereafter, the same process will be repeated

until all tracks have been found and played for

a few seconds each.

• To cancel the HI-LITE Scan operation,

press HI-LITE once more.

• The HI-LITE Scan mode will also be

canceled if the function is switched to any

another input (including iPod a or iPod b).

Note

1 During Cross Fade operation, /, and / are deactivated.

2 If a track’s total length is too short, the track will be played back from the track beginning for a few seconds.

XW-NAC3_SYXJ.book 14 ページ２０１０年３月２５日　木曜日　午後７時２１分

1 ... 13 14 15 ... 132

Comments to this Manuals

No comments