Using the timer08
36
En
Chapter 8:
Using the timer
Setting the clock
Setting the clock allows you to use the timer.
1
1 With the power turned ON, press .
The current time and day are displayed.
• If the clock is not set, the Timer Setup screen
will be displayed. Proceed with Step 3.
2Press
again
.
The Timer Setup screen is displayed.
3Use
/
to select
’Clock Adjust’
, then
press
ENTER
.
The Clock Adjust screen is displayed.
4Use
/
to set the day, then press
ENTER
.
5Use
/
to set the hour, then press
ENTER
.
6Use
/
to set the minute, then press
ENTER
.
When the setting is completed, the newly set
value displays for 2 seconds.
Changing the clock’s display mode
You can choose to display the clock in 12-hour
mode or 24-hour mode.
• Default setting: 12H (12-hour mode)
1 With the power turned ON, press .
The current time and day are displayed.
2 Press
again
.
The Timer Setup screen is displayed.
3Use
/
to select
’Hour Display’
, then
press
ENTER
.
The Hour Display screen is displayed.
4Use
/
to select
’12H’
or
’24H’
, then
press
ENTER
.
When the setting is completed, the newly set
value flashes for 2 seconds.
1 You’ll need to set the clock again if you unplug the unit (or in case of a power failure).
XW-NAC3_SYXJ.book 36 ページ 2010年3月25日 木曜日 午後7時21分
Comments to this Manuals