Pioneer DEH-2800MPB User Manual download pdf (Page 15)

Initial Settings

Adjusting initial settings

1

Using the initial settings, you can customize

various system settings to achieve optimal per-

formance from this unit.

1 Function display

Shows the function status.

1 Press SOURCE and hold until the unit

turns off.

2 Press SOURCE and hold until FM ap-

pears in the display.

3 Press AUDIO to display the function

names.

Press AUDIO repeatedly to switch between

the following settings:

FM (FM tuning step)A-PI (Auto PI Seek)

SAVE (Power save)

Use the following instructions to operate each

particular setting.

# To cancel initial settings, press BAND.

# You can also cancel initial settings by holding

down SOURCE until the unit turns off.

Setting the FM tuning step

Normally the FM tuning step employed by

seek tuning is 50 kHz. When AF or TA is on,

the tuning step automatically changes to 100

kHz. It may be preferable to set the tuning step

to 50 kHz when AF is on.

! The tuning step remains at 50 kHz during

manual tuning.

1 Press AUDIO to select FM.

2 Press c or d to select the FM tuning

step.

Press c to select 50 (50 kHz). Press d to se-

lect 100 (100 kHz).

Switching Auto PI Seek

The unit can automatically search for a differ-

ent station with the same programming, even

during preset recall.

1 Press AUDIO to select A-PI.

2 Press a or b to turn the Auto PI seek

on or off.

Saving the battery

consumption

Switching this function on enables you to save

the consumption of battery power.

! Under this mode, operations other than

turning on the source are not allowed.

Important

If the battery in your vehicle is disconnected the

Power Save mode is canceled. Turn on Power

Save again once the battery has been recon-

nected. If the ignition switch in your vehicle

doesnt have an ACC (accessory) position, it is

possible depending on the connection method

that when Power Save is off, the unit will draw

power from the battery.

1 Press AUDIO to select SAVE.

2 Press a or b to turn power save on or

off.

Operating this unit

En

15

English

Section

03

1 ... 14 15 16 ... 61

Comments to this Manuals

No comments