Pioneer KURO PRO-141FD User Manual download pdf (Page 64)

Use Other Equipment With Your Flat Panel Display

6.8.1 IP Control Setting

To apply the IP Control Setting, follow the directions below.

1 ) Access

IP Control Setting

through the

Control Setup

2 ) Select IP Control from the IP Control Setting menu.

3 ) Select

Enable

from the IP Control menu.

Note:

The default IP Control menu is Disable.

Confirm the IP Address

Enter DHCP, IP Address, Subnet Mask, Default Gateway and LED.

1 ) Access

IP Control Setting

through the

Control Setup

2 ) Select

DHCP

from the IP Control Setting menu.

3 ) Select

Off

from the submenu.

If you select On, an IP Address is automatically acquired.

If the panel fails to assign the IP Address or if you want to obtain different addresses, select Off in Step 3 then

enter an IP Address and Subnet Mask.

4 ) Press RETURN to make your selection.

5 ) Select

LED

from the IP Control Setting menu.

6 ) Select

Off

from the submenu.

Selecting On causes the LAN terminal indicator to light while in use.

7 ) Press EXIT to exit the menu.

IP Control Setting

IP Control : Disable

DHCP : Off

IP Address

Subnet Mask

Default Gateway

MAC Address

LED : On

KURO LINK Setting

Input Setting : Off

Power Off Control : Off

Power On Ready : Off

Hold Sound Status : Off

Power On Test : Off

Power Off Test : Off

Serial Setting

ID No. Set : All

Baud Rate : 9600bps

Control Setup

Exit

PRO-141FD_PRO-101FD.book Page 64 Monday, May 12, 2008 3:27 PM

1 ... 63 64 65 ... 106

Comments to this Manuals

No comments

Pioneer KURO PRO-141FD User Manual Page 64

Comments to this Manuals

Related products and manuals for Televisions Pioneer KURO PRO-141FD