Pioneer PDP-503HDE User Manual download pdf (Page 43)

Using external equipment

Watching a VCR image

Connecting a VCR

You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment.

If your VCR supports TV-VCR advanced “AV Link” systems (see page 41), you can connect the VCR to the

INPUT 2 terminal on the Media Receiver using the fully-wired 21-pin SCART cable.

AV Link advanced system

• Download tuning information directly from TV to VCR (Preset download).

• While watching TV, you can record a programme with a one-touch press of the VCR recording button. (WYSIWYR*)

* Refer to your VCR operation manual as some VCRs have an exclusive key for WYSIWYR.

• When you press the play button on the VCR, the TV automatically turns on from standby and displays a VCR image.

• When you press the system standby button on the VCR, the TV also enters standby mode.

I NOTE >

• TV-VCR advanced “AV Link” systems may not compatible with some external sources.

• It is recommended to connect to the INPUT 2 terminal when using a decoder for ground wave signal input with a VCR. If

INPUT 2 signals preset In auto Installation or programme setup, make sure to set “Decoder” to “INPUT2” In the Programme

Setup “Manual” menu. (See page 29.)

Media Receiver (rear view)

I^^VIDEO^IDEO^^

--------------------------------------------------------------

—1

——

SCART cable

(commercially available)

VCR Decoder

Displaying a VCR image

When connecting to the INPUT 2 terminal, select

“INPUT2” and set the correct input signal type on “Input

Select” in the menu. (See page 49.)

The setting is stored and can be selected on the

“INPUT SOURCE” menu.

To watch a VCR image, select “INPUT2” from the

“INPUT SOURCE” menu using -Q on the remote

control unit or INPUT on the Plasma Display. (See page

49.)

NOTE >

• If the VCR Image does not come In clearly, you may need

to change the input signal type setting on the “Input Select”

menu.

• Refer to your VCR operation manual for the signal type.

)-40

1 ... 42 43 44 ... 196

No comments

Pioneer PDP-503HDE User Manual Page 43