Pioneer PDP-506XDE User Manual download pdf (Page 62)

Enjoying through External Equipment

NOTE

• If you select a parameter other than “Auto”, make such a

setting that results in natural colour.

• If no image appears, specify another digital video signal type.

• For the digital video signal types to be specified, check the

operation manual that came with the connected equipment.

To specify the type of audio signals:

When you use the INPUT 3 HDMI terminal, use the following

procedure to specify the type of audio signals.

1 Repeat steps 1 to 3 provided for “To activate the HDMI

terminal.”

2 Select “Audio” ( / then ENTER).

3 Select the type of audio signals ( / then ENTER).

• If you select “Auto”, an attempt will be made to identify

the type of audio signals when audio signals are

received.

4 Press HOME MENU to exit the menu.

NOTE

• The INPUT 4 HDMI terminal accepts only digital audio

signals.

• If no sound is output, specify another audio signal type.

• For the audio signal types to be specified, check the

operation manual that came with the connected equipment.

• Depending on the equipment to be connected, you also need

to connect analogue audio cables.

Using i/o Link.A

The Plasma Display System incorporates three typical i/o

Link.A functions for smooth connections between Media

Receiver and other audiovisual equipment.

One Touch Play

While the Plasma Display System is in standby mode, it

automatically turns on and plays back images from the

audiovisual source (e.g. VCR, DVD).

WYSIWYR (What You See Is What You Record)

When the remote control unit of the connected VCR has the

WYSIWYR button, you can automatically start recording by

pressing the WYSIWYR button.

Preset Download

Automatically transfers channel preset information from the

tuner on the Plasma Display System to the one on the

connected audiovisual equipment (e.g. VCR) via the INPUT 2 or

3 terminal.

NOTE

• The i/o Link.A functions work only when the audiovisual

equipment is connected to the INPUT 2 or 3 terminal on the

Media Receiver with i/o Link.A via a fully wired 21-pin SCART.

• Either INPUT 2 or 3 is available for i/o Link.A, depending on

the switch on the rear of the Media Receiver.

• Using this switch, select the input terminal to which

recording equipment such as a VCR has been connected.

• Refer to operation manuals of each external equipment for

the details.

• If a SCART cable has been connected to the INPUT 3

terminal with the i/o Link.A activated, input signals (other

than Component) are automatically identified and displayed.

If the i/o Link.A has been deactivated, Video is always

selected for signals other than RGB because the system

cannot identify among RGB, Y/C (S-Video), and CVBS (Video)

signals; for example, receiving Y/C (S-Video) signals results

in monochrome display.

Item Description

Auto

(factory default)

Automatically identifies input audio signals.

Digital Accepts digital audio signals.

Analogue Accepts analogue audio signals.

INPUT 1

CONTROL

SERVICE ONLY

IN OUT

ANT

i /o link.A

SELECT

INPUT

2 3

INPUT 3

HDMI HDMI

SYSTEM CABLE

ANT(DIGITAL)

INOUT

OPTICAL

DIGITAL OUT

COMMON INTERFACE

INPUT 2

COMPONENT VIDEO

AUDIO OUTPUT

INPUT 4

R-AUDIO-L SUB

WOOFER

PB PR

BLACK

WHITE

i / o link.A

SELECT

INPUT

ece

ver

(

rear v

)

SCART cable

(commercially available)

VCR or DVD Recorder (DVR)

PDP506XDE.book Page 62 Friday, June 17, 2005 3:08 PM

1 ... 61 62 63 ... 236

Pioneer PDP-506XDE User Manual Page 62

Comments to this Manuals

Pioneer PDP-506XDE User Manual Page 62

Comments to this Manuals

Related products and manuals for Televisions Pioneer PDP-506XDE