Pioneer PDP-506XDE User Manual download pdf (Page 8)

Important User Guidance Information

CAUTION

PIONEER bears no responsibility for any damage arising from

incorrect use of the product by you or other people,

malfunctions when in use, other product related problems,

and use of the product except in cases where the company

must be liable.

Plasma Display protection function

When still images (such as photos and computer images) stay

on the screen for an extended period of time, the screen will be

slightly dimmed. This is because the protection function of the

Plasma Display automatically adjusts the brightness to protect

the screen when detecting still images; so this does not

designate malfunction. The screen is dimmed when a still

image is detected for about three minutes.

Information of pixel defect

Plasma screens display information using pixels. Pioneer

plasma display panels contain a very large number of pixels.

(Depending on the panel size; over 2.3 million cells in case of a

43 inch display, over 2.9 million pixels in case of a 50 inch

display, over 3.1 million cells in case of a 61 inch display). All

Pioneer display panels are manufactured using a very high

level of ultra-precision technology and undergo individual

quality control.

In rare cases, some pixels can be permanently switched off, or

on, resulting in either a black or coloured pixel permanently

fixed on the screen.

This effect is common to all plasma displays because it is a

consequence of the technology.

If the defective pixels are visible at a normal viewing distance

of between 2.5 and 3.5 meters whilst viewing a normal

broadcast (i.e. not a test card, still image or single colour

display) please contact the supplying dealer.

If, however, they can only be seen close up or during single

colour displays then this is considered normal for this

technology.

Infrared rays

The Plasma Display releases infrared rays because of its

characteristics. Depending on how the Plasma Display is in

use, the remote controls of nearby equipment may be

adversely affected or wireless headphones using infrared rays

are interfered by noise. If this is the case, place that equipment

at a location where its remote control sensor is not affected.

Radio interference

While this product meets the required specifications, it emits a

small amount of noise. If you place such equipment as an AM

radio, personal computer, and VCR close to this product, that

equipment may be interfered. If this happens, place that

equipment far enough from this product.

Plasma Display driving sound

The screen of the Plasma Display is composed of extremely

fine pixels and these pixels emit light according to received

video signals. This principle may make you hear buzz sound or

electrical circuit hamming from the Plasma Display.

Also note that the rotation speed of the cooling fan motor

increases when the ambient temperature of the Media

Receiver becomes high. You may hear the sound of the fan

motor at that time.

Do not attach such items as labels and tape to the

product.

• This may result in the discolouration or scratch of the

cabinet.

When not using the product for a long period of

time

• If you do not use the product for a long period of time, the

functions of the product may be adversely affected. Switch

on and run the product occasionally.

Condensation

• Condensation may take place on the surface or inside of the

product when the product is rapidly moved from a cold place

to a warm place or just after a heater is switched on in winter

morning, for example. When condensation takes place, do

not switch on the product and wait until condensation

disappears. Using the product with condensation may result

in malfunction.

Cleaning the surface of the screen and the glossy

surface of the front cabinet

• When cleaning the surface of the screen or the glossy

surface of the front cabinet, gently wipe it with a dry soft

cloth; the supplied cleaning cloth or other similar cloths

(e.g., cotton and flannel). If you use a dusty or hard cloth or

if you rub the screen hard, the surface of the product will be

scratched.

• If you clean the surface of the screen with a wet cloth, water

droplets on the surface may enter into the product, resulting

in malfunction.

Cleaning the cabinet

• When cleaning the cabinet of this product, gently wipe it

with a clean soft cloth (e.g., cotton and flannel). If you use a

dusty or hard cloth or if you rub the cabinet hard, the surface

of the cabinet will be scratched.

• The cabinet of this product is mostly composed of plastic. Do

not use chemicals such as benzene or thinner to clean the

cabinet. Using these chemicals may result in quality

deterioration or coating removal.

• Do not expose the product to volatile gas or fluid such as

pesticide. Do not make the product contact with rubber or

vinyl products for a long period of time. The effect of

plasticizer in the plastic may result in quality deterioration or

coating removal.

• If you clean the surface of the cabinet with a wet cloth, water

droplets on the surface may enter into the product, resulting

in malfunction.

Handles at the rear of the Plasma Display

• Do not remove the handles from the rear of the Plasma

Display.

• When moving the Plasma Display, ask another person for

help and use the handles attached to the rear of the Plasma

Display. Do not move the Plasma Display by holding only a

single handle. Use the handles as shown.

• Do not use the handles to hang the product when installing

or carrying the product, for example. Do not use the handles

for the purpose of preventing the product from tilting over.

PDP506XDE.book Page 8 Friday, June 17, 2005 3:08 PM

1 2 3 4 5 6 7 8 9 ... 236

Comments to this Manuals

No comments

Pioneer PDP-506XDE User Manual Page 8

Comments to this Manuals

Related products and manuals for Televisions Pioneer PDP-506XDE