Pioneer SC-LX801 User Manual download pdf (Page 27)

> Before start > Hookup > Setup >Playback > Part Names > Advanced Manual

Troubleshooting | Appendix

Others

Listening To the Radio

1. Press TUNER (a) on the remote controller repeatedly to

select either "AM" or "FM" on the display.

2. Press MODE (c) on the remote controller, so that the

"TunMode: Auto" is displayed on the display.

3. When you press the  /  cursor (b) buttons on the

remote controller, automatic tuning starts, and searching

stops when a station is found. When tuned into a radio

station, the "TUNED" indicator on the display lights.

You can preset up to 40 stations.

1. Tune into the AM/FM radio station you want to register.

2. Press +Fav (d) on the remote controller so that the

preset number on the display flashes.

3. While the preset number is flashing (about 8 seconds),

repeatedly press the  /  cursor (b) buttons on the

remote controller to select a number between 1 and 40.

4. Press +Fav (d) again on the remote controller to register

the station. When registered, the preset number stops

flashing. To select a preset radio station, press the  /

 cursor (b) buttons on the remote controller.

0 To delete a preset station, press the  /  cursor (b)

buttons on the remote controller to select the preset

number you want to delete, press +Fav (d) on the

remote controller and then press CLEAR (e) while the

preset number is flashing. When deleted, the number on

the display goes off.

Frequency step setting

Press the button on the remote controller to select

"System Setup" – "Miscellaneous" – "Tuner" – "AM/FM

Frequency Step" or "AM Frequency Step" and select the

frequency step for your area. Note that when this setting is

changed, all radio presets are deleted.

Multi-zone

Play

1. Switch the remote controller to the mode for controlling

ZONE 2 or ZONE 3.

To switch to the mode for controlling ZONE 2, while

holding down MODE (a) on the remote controller, press

ZONE 2 (b) for 3 or more seconds until the remote

indicator blinks twice.

To switch to the mode for controlling ZONE 3, while

holding down MODE (a) on the remote controller, press

ZONE 3 (c) for 3 or more seconds until the remote

indicator blinks three times.

2. Point the remote controller at the main unit and press Í

(e).

"Z2" or "Z3" lights on the main unit display.

3. Press the input selector button (f) of the input to be

played in the separate room. On the main unit, after

pressing ZONE CONTROL several times to display

either "Z2" or "Z3" in the display, within 8 seconds turn

the INPUT SELECTOR dial to select the input to be

played in the separate room.

0 You can only select the same inputs for the main

room and separate room with the "NET" or "BT

AUDIO", or "USB" input selector. If you have "NET"

selected in the main room and then select "USB" in

the separate room, the main room also switches to

"USB". You cannot select different stations for the

main room and separate room with the AM/FM radio.

0 DSD and Dolby TrueHD audio signals are not output

to ZONE 2/ZONE 3 when selected with the "NET",

To return the remote controller to main room control

mode: While holding down MODE (a) on the remote

controller, press MAIN (d) for 3 seconds or more until the

remote indicator flashes once.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 116 117

Comments to this Manuals

No comments

Pioneer SC-LX801 User Manual Page 27

Comments to this Manuals

Related products and manuals for AV receivers Pioneer SC-LX801