15
> Specifications > Settings > Listening Modes > Playback Function > Basic Manual
Troubleshooting | Appendix
■ Distance
Set the distance from each speaker to the listening position. Press
on the remote
controller, and select the MCACC Memory first in "AV Adjust" - "MCACC" - "MCACC
Memory".
Setting Item Default Value Setting Details
Front Left 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
Center 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
Front Right 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
Height 1 Left 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 1 Right 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 2 Left 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Height 2 Right 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surround Right 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
Surr Back Right 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Surr Back Left 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
•
Depending on the use of the ZONE speakers, it
may not be possible to select this setting.
Setting Item Default Value Setting Details
Surround Left 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
Subwoofer 1 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
Subwoofer 2 10' 0" / 3.00 m Specify the distance between each speaker and
the listening position.
•
Default values vary depending on the regions.
•
Distance units can be switched by pressing MODE on the remote controller. When the unit is set as
feet, you can set between 0' 0" 1/2 and 30' 0" in increments of 1/2. When the unit is set as meters,
you can set between 0.01 m and 9.00 m in increments of 0.01 m.
Comments to this Manuals