Pioneer SC-LX801 User Manual download pdf (Page 76)

> Specifications > Settings > Listening Modes > Playback Function > Basic Manual

Troubleshooting | Appendix

•

The result may not be as expected depending on the input source and listening mode setting.

■ EQ Professional

You can automatically measure and calibrate the reverberation characteristics (how the

sound echoes) of the room. First measure the reverberations with "Reverb Measurement",

then check the results with "Reverb View". Specify the calibrated time position in

"Advanced EQ Setup" based on the measured results to automatically calibrate the

reverberation characteristics.

Reverb Measurement :

Measure the reverberation characteristics of the room. After making the following settings,

place the speaker setup microphone in the listening position, and connect to the MCACC

SETUP MIC jack on the main unit. Press ENTER and follow the on screen instructions.

Setting Item Default Value Setting Details

Reverb Measure without EQ Select the method for measuring the reverberation

characteristics.

"without EQ": MCACC is used to measure the

reverberation characteristics of the room without

any adjustments made to the equalizer of the

speakers.

"with EQ": Measures the reverberation

characteristics of the room using the adjustments

to the equalizer of the speakers saved in the

MCACC Memory.

Reverb View :

The results of the measurements of the reverberation characteristics are shown in graphs

for each speaker and frequency. If there is no reverberation, the graph stays horizontal, but

if there is reverberation the graph rises to the right. If the "Symmetry" calibration type has

been selected and Full Auto MCACC was performed, predicted values for the reverberation

characteristics after calibration are also shown.

Advanced EQ Setup :

Reverberation characteristics are automatically calibrated according to the settings made.

After making the following settings, place the speaker setup microphone in the listening

position, and connect to the MCACC SETUP MIC jack on the main unit. Press ENTER and

follow the on screen instructions.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 116 117

No comments

Pioneer SC-LX801 User Manual Page 76