Pioneer VSX-924 User Manual download pdf (Page 29)

Connecting your equipment

Connecting AM/FM antennas

Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality,

connect external antennas (see Connecting external antennas on page 29 ).

ANTENNA

FM UNBAL

AM LOOP

ab c

1 Pull off the protective shields of both AM antenna wires.

2 Push open the tabs, then insert one wire fully into each terminal, then release the tabs to

secure the AM antenna wires.

3 Fix the AM loop antenna to the attached stand.

To fix the stand to the antenna, bend in the direction indicated by the arrow (fig. a) then clip the loop onto the

stand (fig. b).

! If you plan to mount the AM antenna to a wall or other surface, secure the stand with screws (fig. c) before

clipping the loop to the stand. Make sure the reception is clear.

4 Place the AM antenna on a flat surface and in a direction giving the best reception.

5 Connect the FM wire antenna into the FM antenna socket.

For best results, extend the FM antenna fully and fix to a wall or door frame. Don’t drape loosely or leave coiled up.

Connecting external antennas

To improve FM reception, connect an external FM antenna to FM UNBAL 75 W.

ANTENNA

FM UNBAL

AM LOOP

75 Ω coaxial cable

To improve AM reception, connect a 5 m to 6 m length of vinyl-coated wire to the AM LOOP terminals without

disconnecting the supplied AM loop antenna.

For the best possible reception, suspend horizontally outdoors.

ANTENNA

FM UNBAL

AM LOOP

Outdoor antenna

Indoor antenna

(vinyl-coated wire)

5 m to 6 m

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 122 123

No comments

Pioneer VSX-924 User Manual Page 29