Pioneer VSX-924 User Manual download pdf (Page 43)

Basic playback

Playing a source

Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system.

STANDBY/ON

VOLUME

iPod

TUNER

USB ADPTROKU

MHL

DVDBD SAT

SOURCE CONTROL

HDMI

NET

ALL

SURRAUTO ADV

LISTENING MODE

1 Switch on your system components and receiver.

Start by switching on the playback component (for example a DVD player), your TV and subwoofer (if you have

one), then the receiver (press u STANDBY/ON).

Make sure that the TV’s video input is set to this receiver.

2 Select the input function you want to play.

You can use the input function buttons on the remote control or the front panel INPUT SELECTOR dial.

! As necessary, select the type of audio input signal (page 54 ).

3 Press AUTO (AUTO SURR/ALC/STREAM DIRECT) to select ‘AUTO SURROUND’ and start

playback of the source.

For such sound sources as Dolby TrueHD and DTS-HD, the surround sound is played. With stereo sound, the

sound is played from the left and right front speakers with the default listening mode.

To play a stereo sound source in multichannel, press SURR or ADV to select your favorite listening mode.

(Example: Press ADV several times to select EXT.STEREO.)

! You may need to check the digital audio output settings on your DVD player or digital satellite receiver. It

should be set to output Dolby Digital, DTS and 88.2 kHz / 96 kHz PCM (2 channel) audio, and if there is an

MPEG audio option, set this to convert the MPEG audio to PCM.

! See also Listening to your system on page 51 for information on different ways of listening to sources.

It is possible to check on the front panel display whether or not multi-channel playback is being performed prop-

erly. For details, see Auto Surround, ALC and Stream Direct with different input signal formats on page 110 .

When multi-channel speakers (more than the two front left and right channels) are connected, straight decoding

is performed, so the input signal’s format name (for example, TrueHD, DTS-HD MSTR or DTS-HD HI RES) is

displayed.

If the display does not correspond to the input signal and listening mode, check the connections and settings.

4 Use the VOLUME +/– to adjust the volume level.

Turn down the volume of your TV so that all sound is coming from the speakers connected to this receiver.

Note

Depending on the input to be played, the playback operation can in some cases be performed using the on-

screen display.

The OSD display is only displayed when the receiver’s HDMI OUT 1 terminal and the TV’s HDMI input are con-

nected with an HDMI cable. If the TV is connected with anything other than an HDMI cable, watch the front panel

display while performing the various operations and making settings.

Turning off the sound

Mutes the sound or restores the sound if it has been muted (adjusting the volume also restores the sound).

% Press MUTE.

Playing a source with HDMI connection

% Use ALL to select the input function connected to the receiver’s HDMI input terminals.

You can also perform the same operation by using the INPUT SELECTOR dial on the front panel or by pressing

HDMI on the remote control repeatedly.

! Set the HDMI parameter in Setting the Audio options on page 67 to THROUGH if you want to hear HDMI

audio output from your TV (no sound will be heard from this receiver).

! If the video signal does not appear on your TV, try adjusting the resolution settings on your component or dis-

play. Note that some components (such as video game units) have resolutions that may not be converted. In

this case, use an analog video connection.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 122 123

Comments to this Manuals

No comments

Pioneer VSX-924 User Manual Page 43

Comments to this Manuals

Related products and manuals for AV receivers Pioneer VSX-924