When connecting to separately sold power amp
5
Connecting the Units
ENG/MASTER 96 INST
<CRD3965-A> 6
This product
When you connect the separately sold
multi-channel processor (e.g. DEQ-P6600)
to this unit, do not connect anything to the
speaker leads and system remote control
(blue/white)
ote
Change the initial setting of this produc
(refer to the Operation Manual)
The subwoofer output of this unit is monaural.
ote
When you connect the multi-channel processor to
his unit, a separately sold p
connected to the multi-channel processor
Front output
(FRONT OUTPUT)
Subwoofer output
or non fading output
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
23 cm
15 cm
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
Blue/white (6*)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 6* and
7* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 6* and 7*.
Comments to this Manuals