Pioneer AVIC F900BT User Manual download pdf (Page 10)

—“Video image” that is output from the built-

in DVD drive (DVD-V, DVD-VR, DivX) and

AV input (AV1, AV2) can be displayed on

the rear display.

Rear view camera ready

You can display what is behind the vehicle if

connected to a rear view camera (e.g. ND-

BC2) (sold separately).

Map coverage

For more details about the map coverage of

this navigation system, refer to the information

on our website.

Protecting the LCD panel

and screen

p Do not allow direct sunlight to fall on the

LCD screen when this product is not being

used. Extended exposure to direct sunlight

can result in LCD screen malfunction due

to the resulting high temperatures.

p When using a mobile phone, keep the aer-

ial of the mobile phone away from the LCD

screen to prevent disruption of the video in

the form of spots, coloured stripes, etc.

p To protect the LCD screen from damage, be

sure to touch the touch panel keys with

your finger. (The stylus is supplied for spe-

cial calibrations. Do not use the stylus for

normal operations.)

Viewing the LCD comfortably

Due to its construction, the viewing angle of

the LCD screen is limited. However, “Bright-

ness” may be used to adjust the black density

of the video. When using the screen for the

first time, the adjustment of the black density

for clear viewing is recommended.

Notes for internal memory

Before removing the vehicle

battery

If the battery is disconnected or discharged,

the memory will be erased and must be repro-

grammed.

p Some data remains. Read Returning the na-

vigation system to the default or factory set-

tings before you operate this function.

= For more detailed information about the

items to be deleted, refer to Returning

the navigation system to the default or

factory settings on page 133.

About the data being deleted

The information is erased by pressing RESET

button or disconnecting the yellow lead from

the battery (or removing the battery itself).

However, some items remain.

p Some data remains. Read Returning the na-

vigation system to the default or factory set-

tings before you operate this function.

= For more detailed information about the

items to be deleted, refer to Returning

the navigation system to the default or

factory settings on page 133.

Resetting the microprocessor

CAUTION

Pressing RESET button clears the settings for the

AV source without clearing all the navigation

function items. Please refer to the related section

before clearing.

= For more detailed information about the items

to be deleted, refer to Returning the navigation

system to the default or factory settings on

page 133.

The microprocessor must be reset under the

following conditions:

! Prior to using this product for the first time

after installation.

! If the product fails to operate properly.

Introduction

Engb

10

Chapter

01

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 167 168

Comments to this Manuals

No comments